User's Manual

ManualsBrandsSamsung ManualsMobile PhonesSamsung Vitality (Cricket)

101

102

103

104

105

106

107

108

109

110

Health and Safety Information 105

The FCC exposure limit incorporates a substantial margin of

safety to give additional protection to the public and to account

for any variations in measurements.

SAR tests are conducted using standard operating positions

accepted by the FCC with the phone transmitting at its highest

certified power level in all tested frequency bands. Although the

SAR is determined at the highest certified power level, the actual

SAR level of the phone while operating can be well below the

maximum value. This is because the phone is designed to

operate at multiple power levels so as to use only the power

required to reach the network. In general, the closer you are to a

wireless base station antenna, the lower the power output.

Before a new model phone is available for sale to the public, it

must be tested and certified to the FCC that it does not exceed

the exposure limit established by the FCC. Tests for each model

phone are performed in positions and locations (e.g. at the ear

and worn on the body) as required by the FCC.

For body-worn operation, this phone has been tested and meets

FCC RF exposure guidelines when used with an accessory that

contains no metal and that positions the mobile device a

minimum of 1.5 cm from the body.

Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

The FCC has granted an Equipment Authorization for this mobile

phone with all reported SAR levels evaluated as in compliance

with the FCC RF exposure guidelines. The maximum SAR values

for this model phone as reported in the FCC equipment

authorization grant are:

•

CDMA:

–

Head: 0.53 W/kg.

–

Body: 0.87 W/kg.

–

Product Specific: 0.99 W/kg.

SAR information on this and other model phones can be viewed

online at

http://www.fcc.gov/oet/ea

. To find information that

pertains to a particular model phone, this site uses the phone

FCC ID number which is usually printed somewhere on the case

of the phone.

Sometimes it may be necessary to remove the battery pack to

find the number. Once you have the FCC ID number for a

particular phone, follow the instructions on the website and it

should provide values for typical or maximum SAR for a particular

phone. Additional product specific SAR information can also be

obtained at