User's Manual

36
Note: Phone contacts are always the primary contact for linking. You can link
imported contacts to a Phone contact, but the Phone contact will
always display; the imported contact will show as the linked contact.
Joining contacts
1. From the Home screen, touch Phone ➔ Contacts .
2. Touch a Phone contact to display its information.
3. Press Menu , then touch Edit contact .
4. Press Menu , then touch Join .
5. Touch an imported contact record to link it to the Phone
contact.
Unjoining contacts
1. From the Home screen, touch Phone ➔ Contacts .
2. Touch a joined contact to display its information.
3. Press Menu , then touch Edit contact .
4. Press Menu , then touch Separate . You are prompted
to verify the separation.
5. Touch OK .
Sending a Namecard (vCard)
You can send a contact namecard as a vCards via Bluetooth to
other Bluetooth devices, or via Gmail as an attachment.
Important!: Not all Bluetooth devices will accept contacts, and not all devices
support transfers of multiple contacts. Check the target device’s
documentation.
1. From the Home screen, touch Phone ➔ Contacts .
2. Touch a contact to display its information.
3. Press Menu , then touch Share .
4. At the prompt, choose a sending method, then follow the
prompts to send the namecard:
•Bluetooth : For more information about sending via Bluetooth, see
“Bluetooth” on page 65
•Gmail : For more information about sending Gmail, see
“Composing and Sending Gmail” on page 45
•Email : For more information about sending Gmail, see
“Composing and Sending Email” on page 47
Tip: You can also send Contact namecards in Email messages, after you add
an Email account. (For more information, refer to “Accounts & sync” on
page 92.)