User's Manual

Settings 81
•Discoverable : Control your phone’s visibility to other devices’
Bluetooth searches. Touch to turn On or Off. Available when
Bluetooth is turned On.
• Scan devices : Touch to scan for nearby discoverable devices. After
searching, touch a device to pair with it. For more information, see
see “Pairing with a Bluetooth Device” on page 65.
VPN settings
The VPN settings menu allows you to set up and manage Virtual
Private Networks (VPNs).
Important!: Before you can use a VPN you must establish and configure one.
Adding a VPN
Before you add a VPN you must determine which VPN protocol to
use: PPTP (Point-to-Point Tunneling Protocol), L2TP (Layer 2
Tunneling Protocol), L2TP/IPSec PSK (Pre-shared key based
L2TP/IPSec), or L2TP/IPSec CRT (Certificate based L2TP/IPSec).
1. From the Settings menu, touch Wireless & networks ➔
VPN settings .
2. Tap Add VPN .
To establish a PPTP (Point-to-Point Tunneling Protocol):
1. Tap Add PPTP VPN .
2. Tap VPN name , add a name for this connection using the
keypad, then tap OK .
3. Tap Set VPN server , add a name using the keypad, then tap
OK .
4. Tap Enable Encryption to make a checkmark (if desired).
5. Tap DNS search domains , add a name for DNS search using
the keypad, then tap OK .
To establish a L2TP (Layer 2 Tunneling Protocol):
1. Tap Add L2TP VPN .
2. Tap VPN name , add a name for this connection using the
keypad, then tap OK .
3. Tap Set VPN server , add a name using the keypad, then tap
OK .
4. Tap Enable L2TP Secret to make a checkmark (if desired).
5. Tap Set L2TP Secret and enter a password (if desired), then
tap OK .
6. Tap DNS search domains , add a name for DNS search using
the keypad, then tap OK .