Specifications
6-112 | OWNER’S GUIDE
Signal conditioning
The DEWE-3050 can be equipped in countless ways. Here are the most popular congurations:
16 x DAQ / PAD / HSI series plug-in signal conditioners, or
32 x DAQ / PAD / HSI series plug-in signal conditioners, or
16 x 8-channel MDAQ-SUB-BNC conditioners (128 channels total), or
12 x 8-channel MDAQ-SUB-DSUB conditioners (96 channels total), or
16 x DAQ / PAD / HSI modules PLUS up to 64 channels of MDAQ conditioners
When every possible panel space is not lled, other function panels can additionally be added. Please see
the previous page for a listing of these panels.
A/D card(s)
The DEWE-3050 has ve full length PCI slots inside. As a standard, the ORION-1616-100 A/D card is
installed when you buy the data acquisition system. This card provides the following basic specications (fur-
ther details are shown in the specication tables in the next pages):
16 simultaneously sampled analog input channels
16-bit resolution, separate ADC per channels
100 kS/s/ch maximum sample rate
2 synchronous counter/encoder inputs
8 each digital input and output lines
At the time of ordering, this card can be upgraded, using any of the options available for increasing the
channel count, the bit resolution to 22 or 24-bit, or increasing the sample rate up to 1 MS/s/ch, and many
combinations of the preceding. See the UP-ORION options for all of the possibilities.
In addition, many options can be factory installed onto the ORION cards, including adding two high speed
CAN BUS interfaces, or expanding the number and capabilities of the digital counters that are installed.
Furthermore, multiple ORION series cards may be installed. A few examples:
5 x ORION-1624-200 cards for a 40 channel noise and vibration analyzer
3 x ORION-3216-100 cards for a 96 channel general purpose system
4 x ORION-1616-1000 cards for a 64 channel HIGH SPEED acquisition system (1 MS/s/ch)