Specifications

OWNER’S GUIDE  DEWE3050 | 6123
Overheating any electrical component is dangerous.
- NOTE: The DEWE-3050 can be operated without bat-
teries simply by connecting the DPS-2410.
- This can also help you refresh batteries which have
become 100% discharged, which can happen over
time. If the mainframe will not start up, simply
remove all of your batteries, then power up the
system using external AC power. When the system
is up and running, insert only one battery. Wait 30
minutes and then insert a second battery into the
second slot, and so on.
For faster recharging, do NOT power up the DEWE-
3050 mainframe, but make certain that the AC
power is connected.
- There is a one-slot desktop style battery charger
available (BAT-CHARGER-1).
Using the smart batteries
The “smart batteries” supplied with your Dewe-
tron battery powered system are equipped with an
integrated circuit which stores information such as
manufacturer, serial number, production date, etc.,
and monitors the current battery status in terms of
discharge rate, predicted remaining capacity, tem-
perature, voltage etc.
SideHAND2 series “smart batteries” are capable of
displaying their charge state even when not plugged
into anything.
A small LCD display on the battery pack shows the
current charge state in 25% steps. An intelligent
battery controller, integrated in our DEWETRON
systems, takes care of the charging and discharging
process in order to ensure maximum battery perfor-
mance and lifetime.
SideHAND2 series batteries have a small LCD display on
their end near the plastic pull tab. This LCD will indicate the
approximate level of charge in 25% steps.
Optional BAT-CHARGER-1 is
ideal for desktop usage.