Specifications

9-188 | OWNER’S GUIDE
the three sub choices under Paste source (<module type> : <channel>) means:
 Paste - it will simply paste the settings from the channel you copied to this channel, EXCEPT that it will
not paste the channel name, channel color, or the Used/Unused status to this channel.
 Paste to all - it will paste the settings from the channel you copied to ALL channels, EXCEPT that it will
not paste the channel name, channel color, or the Used/Unused status to the other channels.
 Paste special… - here you can choose exactly which parameters it will paste from the channel you cop-
ied to this channel, or even a range of channels. So if you wanted to really make them all the same color,
or paste to a range of channels (example: copy channel 14 and then paste it to channels 23 to 31).
If you select the Paste special... option, you get this screen where you can control what gets pasted, and to
which range of channels:
You can click the boxes in the PASTE column to toggle whether this parameter gets pasted or not. As
mentioned, the Used/Unused status is not normally pasted from one channel to another, but here we can
override that and paste that, too, as well as the channel name, etc. At the top we told it to paste from Slot 1
to Slot 3, so that channels 1, 2, and 3 will receive this paste simultaneously. Click OK to execute the paste,
and see what happens: