Specifications

9-212 | OWNER’S GUIDE
In our case, we have a Project called “DEMO,” in which there is no data acquisition hardware dened, and
DEWESoft creates waveforms for demo and training purposes. The checkbox tells us that this is the cur-
rently active Project. There is also another project called “DEWE43,” which is used when we connect our
DEWE-43-V unit, and a third Project called “Sound card,” in which we use the computer’s sound card as a
two channel sound recorder.
Hardware setup screen
Let’s check the hardware settings of the active Project. Simply click the Hardware setup… menu item. This
menu will close and the hardware setup dialog will open.
Hardware setup is where you control all of the hardware connected to your system, as well as the options
that you might have purchased for DEWESoft. Your license info is also stored here. There are several
screens, starting with ANALOG.
You can see that we have selected No A/D Hardware, since we want this project to be purely for demo and
training purposes, even when there is no hardware connected. But we have selected the Ampliers to be
COM port or ofine, so that we can use them in the setup mode for training.
In our other Project where we connect the DEWE-43-V and DAQ modules to make real measurements, the
hardware setup screen looks different, of course: