Specifications

9-214 | OWNER’S GUIDE
tional option called DEWESoft-OPT-POWER.
BUT if you want to try them before buying them, the solution is simple: create a new project called DEMO
and then set it up with NO A/D HARDWARE like we did, and then you can turn on every option in the world!
No license is needed for the demo mode! In demo mode, DEWESoft will generate sinusoidal waveforms that
you can use to test any function that you want, without any license.
And now with the ability to have different projects, you don’t have to take a risk by changing your “real” hard-
ware setup -- just make a project called DEMO and then set up the hardware for this demo/testing mode,
where every option is turned on. The only thing you cannot do is try these functions with real data coming in
(unless you purchase the option of course).
These options are called “built-ins” because they are included already in the DEWESoft source code - they
simply require a valid license to be used for real.
DEWESoft Plugins
Then there are options which can be added in to DEWESoft as little snippets of code, or quick large chunks,
called PLUGINS. These plugins are easy to install - you simply copy them into the \addons directory under
the DEWESoft program le location on the hard disk. Then restart DEWESoft, and all installed plugins will
be shown in the Plugins tab here on hardware setup. For example:
Above you can see that we have a variety of plugins installed. Some of them are free of charge, while others
are included with the hardware option that you have purchased from us, or are an extra cost option.