Specifications

9-248 | OWNER’S GUIDE
Set your channels to USED
It is an absolute MUST that channels be set to USED. Only channels which are USED can be shown on the
displays, recorded, or processed within MATH functions. Be sure to press this button for all channels that
you want to record / display / process in math!
Filter chains and channels MUST be set to USED here in order to be displayed/recorded/processed
You’re Ready Record Data
Now that your ethernet data has been dened, you can use these channels just as if they were analog chan-
nels.
Display Move to your display screens and you will see these channels in the channel LIST on the right
side of the display. You can put them into digital and analog meters, Recorder Graphs, and
Tabular displays.
- Note - because ethernet data is essentially asynchonous channels, they cannot be put into the SCOPE graph or
FFT graph directly.
Recording Just like any other channel(s) within the software, these channels will be STORED when you
record data. And of course, replayed later when you analyze the data le.
Process Just like any other channel(s) within the software, these channels can be used within your
MATH functions, and even combined with other synchronous and asynchronous channels to
create unlimited derived parameters.