Specifications

10-260 | OWNER’S GUIDE
Important safety notices:
⇒ Never block the vetilation holes on any side of the Neutrino-4
⇒ Always locate the Neutrino-4 in an open, well ventilated area
⇒ Never apply power to the Neutrino-4 when it is enclosed within the carry bag, shipping case, or any other loca-
tion where air ow is restricted.
⇒ Always replace the external fuse with the same value and type. Never substitute a larger A value.
⇒ Use the chassis ground point if needed to reference the voltage to the UUT or test stand
⇒ Do not open the Neutrino-4. Service must be performed by qualied DEWETRON service personnel.
⇒ If the chassis appears damaged, or any connector is loose or damaged in any way, do not apply power to the
Neutrino-4.
⇒ Never use the Neutrino-4 for any purpose other than for which it was supplied by DEWETRON.
⇒ Failure to observe these safety protocols, as well as other best practices related to electronic equipment and
power conversion equipment, can lead to equipment damage, or bodily harm or even death to you and others.