Specifications
OWNER’S GUIDE CONDITIONERS, DAQ | 13303
There are several series of Dewetron signal conditioners that may be installed in your system in many pos-
sible combinations. This section covers the DAQ series plugin modules. These are user-exchangeable mod-
ules, nearly all of which have robust signal isolation, protecting you and your measurements against ground
loops and other typical measurement problems.
DAQ modules have the advantage of being “hot swappable,” meaning that they can be exchanged by the
user any time, even with the system is powered on.
This modularily also means that the DEWETRON system can be converted very quickly to handle different
measuring requirements and applications - simply plug in the modules that you need, make sure their ad-
dresses are correct, and then you’re up and running in a matter of moments.
DEWETRON DAQ modules are small, multi-range ISOLATED signal conditioners, and hundreds of thou-
sands of them are in use all around the world right now.
DAQ Series Modules
DAQ Module Connectors
Front Panel Connector Accessible to the user. The connector type and pin assignment varies
from module to module. Detailed pin assignment of each module is shown
in the appropriate module description.
Rear Connector Not user accessible. 9-pin male SUB-D, interface to the Dewetron System.
HSI, DAQ, and PAD
module rear panel
13
DAQ Series Signal Conditioners