Specifications

OWNER’S GUIDE  CONDITIONERS, DAQ | 13315
V
DAQP-DMM Isolated High Voltage Module (20/30 kHz)
Voltage input: 6 ranges (±10 V to ±1000 V)
Bandwidth: 30 kHz maximum
Isolation: 1500 VRMS
Signal input: Insulated banana jacks
DAQP-DMM Specications
Parameter DAQP-DMM
Input ranges: ±10, ±40, ±100, ±200, ±400, ±1000 V
Range selection: Pushbutton or software command
DC accuracy: 0.1 % of reading ±0.1 % of range
Gain linearity: Better than ±0.03 %
Gain drift range: Typ. 20 ppm/°K, max. 40 ppm/°K
Input resistance: 10 MΩ (±0.1 %)
Bandwidth (-3 dB ±1.5 dB @ f0)
10 V to 40 V range
100 V to 200 V range
400 V to 1000 V range
Typical 20 kHz
Typical 25 kHz
30 kHz
Filter selection: Pushbutton or software command
Filter: 10 Hz, 100 Hz, 1 kHz, 3 kHz (±1.5 dB @ f0)
Filter characteristics
@ 0.01, 0.1, 1, 3 kHz
@ 30 kHz
Butterworth 40 dB / decade (12 dB / octave)
100 dB / decade (30 dB / octave)
Typ. SNR @ max. bandwidth
10 V range
100 V range
1000 V range
60 dB
76 dB
81 dB
Typical CMRR:
73 dB @ 0 Hz
70 dB @ 50 Hz
57 dB @ 400 Hz
Isolation voltage: 1.5 kVRMS
Output voltage: ±5 V
Output resistance: <10 Ω
Output current: 5 mA max.
Output protection: Continuous short to ground
Power supply voltage: ±9 VDC ± 1%
Power consumption: 0.65 W typical
RS-485 interface for module control: Yes
TEDS support: N/A
MSI support: N/A