Specifications

13-334 | OWNER’S GUIDE
Parameter DAQP-BRIDGE-A
Power supply voltage: ±9 VDC (±1 %)
Power consumption:
Typ. 1.44 W @ 350 Ω, 1.83 W @ 120 Ω (both full bridge @ 5 VDC excitation) Max: 3 W (depending on
sensor) *
Module Pin-outs
⇒ CAUTION: The sensor shield can be connected to either pin 4 (SUB-D version only) or the housing of the 9-pin
SUB-D / 8-pin LEMO connector, depending on your application.
Full bridge signal connection
6-wire sensor connection 4-wire sensor connection
⇒ Sense leads (SUB-D: pin 3 and 6; LEMO: pin 5 and 6) MUST be connected!