Specifications
OWNER’S GUIDE CONDITIONERS, MDAQ | 15385
- 1) ‘R+’ has to be connected only if shunt calibration is required, otherwise it can be left unconnected.
Quarter bridge signal connection
3-wire sensor connection (Sense+ is connected to EXC+ at the sensor)
⇒ Sense leads (SUB-D: pin 3 and 6 must be connected!
- ‘R+’ has to be connected only if shunt calibration is required, otherwise it can be left unconnected.
- The 3-wire quarter bridge is only able to compensate symmetrical wire resistance
Other measurement modes and hook-ups
Voltage and microvolt measurement signal connection