Specifications

18-444 | OWNER’S GUIDE
Video interface setup
Once the card is installed and congured for DirectShow under Windows, run DEWESoft and then go to
hardware setup under the SETTINGS button. Click the VIDEO button to see the setup for your cameras and
video inputs:
You need to enable DIRECTX video via the checkbox. When you do, the VIDEO-FG4 card should show up
automatucally, and four video channels should appear in the list. If this does not happen, then the card is not
set up properly under Windows, because DEWESoft will always see any properly congured DirectX video
sources that are available under Windows.
Be sure that the ENABLED column is set to YES for each of the video streams that you want to be able to
display and record.
In the bottom section you can choose the type of video les that will be created, and the compression for-
mat.
Once this is done, and you return to the SETUP screens, you will have a new button called VIDEO in the
toolbar. Click it to access the video streams, preview them, and activate them for display and recording.