Specifications
OWNER’S GUIDE DEWETRON SENSORS | 19463
DEWE-CAM-USB Specications
DEWE-CAM-USB Specs
Image sensor 1/4” IL CCD
Active pixels 768 x 494 (NTSC) / 752 x 582 (PAL)
Viewer display (USB 2.0, 30fps) / 720 x 480 pixels max (NTSC / 720 x 576 pixels max (PAL)
Sensitivity < 0.5 Lux
Signal To Noise Ratio > 48 dB (AGC off)
Gamma 0.45 default (1.0 via Software)
Gain control Automatic 36 dB (AGC default) or Fixed options via software
Scan mode Interlaced / Non Interlaced (selectable via Software)
Synchronization Internal
Back Light Compensation On by default
White Balance Mode AWB auto white mode, Fixed modes selectable via software
Contour enhancement On by default
Iris control CCD Iris default
Shutter speed Automatic
Video output USB 2.0
Power supply 5 VDC via USB bus
Power consumption < 1.3 W
Environmental
Operating temperature -15°C to + 55°C (5°F to + 131°F)
Storage temperature -25°C to + 70°C (-13°F to + 158°F)
Operating humidity 20% up to 93% RH
Storage humidity Up to 98% RH
Lifetime MTBF > 150000
Mechanical
Dimensions 50mm x 50mm x 49.6mm (without lens mount) (1.97” x 1.97” x 1.95”)
Weight 154g (0.34 lb)
Cable Integrated 8.2 ft. USB cable