User Manual
65
ENGLISHENGLISH
Advanced Recording
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in
SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■
If you want to use an external microphone,
connect the microphone to the external MIC
input jack on the camcorder.
■
When you wish to dub using the External A/V
input, connect the Multi-AV cable to the
camcorder by inserting the Multi-AV cable into
the Multi-AV Jack at the rear of the camcorder.
(VP-D323i/D325i/D327i only)
- Press the MENU button, move the MENU
SELECTOR to highlight A/V and push the
MENU SELECTOR.
- Move the MENU SELECTOR to highlight
AV IN/OUT and push the MENU
SELECTOR to select AV IN.
2. Press the (PLAY/STILL) button and find the
timeframe of the scene to be dubbed.
3. Press the (PLAY/STILL) button to pause the
scene.
4. Press the A.DUB button on the Remote Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub state for
dubbing.
5. Press the (PLAY/STILL) button to start
dubbing.
■
Press the (STOP) button to stop the dubbing.
Notes
■
You can not use the audio dubbing function while playing a write protected
video tape.
■
When you wish to dub using the External A/V input, you must connect the
Multi-AV cable to the audio system from which you wish to record.
(VP-D323i/D325i/D327i only)
■
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing
✤ AUDIO DUBBING
✤ 12 SP
✤
✤
1. PLAYER
■
■
A/V
Multi-AV
Multi-AV
( VP-D323i/D325i/D327i)
-
MENU MENU
SELECTOR
A/V
MENU SELECTOR
- MENU SELECTOR
AV IN/OUT MENU SELECTOR
AV I N
2. PLAY/STILL /
3. PLAY/STILL /
4. A.DUB
■
A.DUB
■
5. PLAY/STILL /
■
STOP
■
■
External A/V A/V Multi-AV
( VP-D323i/D325i/D327i)
■
LP 16bit
Audio dubbing
(VP-D323i/D325i/D327i only)
AV IN
Audio (L)
Audio (R)