User Manual

ENGLISH-34
Information codes
<SR1AM7010UW series>
1
The three
indicators below
blink and an
information
codes alarm
sounds.
2
Turn off the
emergency
switch, check
the instructions
below, and then
take appropriate
action.
3
The information
code will
disappear when
you turn on
the emergency
switch
Information codes
Information codes animation
Information codes Checklist
The POWERbot is caught, stuck or trapped while moving.
fTurn off the emergency switch, and then move the POWERbot to
another area.
Foreign matter is caught in the brush.
fTurn off the emergency switch, and then remove the foreign matter
from the brush.
Foreign matter is caught in the left Driving wheel.
fTurn off the emergency switch, and then remove the foreign matter
from the Driving wheel.
Foreign matter is caught in the right Driving wheel.
fTurn off the emergency switch, and then remove the foreign matter
from the Driving wheel.
Foreign matter is caught in the auto shutter tool.
fTurn off the product by pressing the emergency switch, and then
remove the foreign matter from the auto shutter tool.
The bumper sensor needs to be checked.
fTurn off the emergency switch, and then turn it back on.
fIf the information code does not disappear, check if there's any
foreign matter between the bumper and the main body. If there is,
pull the bumper slightly, and then remove the foreign matter.
Foreign matter has accumulated on the obstacle sensor.
fTurn off the emergency switch, and then clean the front and rear
sensor with a soft cloth.
Foreign matter has accumulated on the cliff sensor.
fTurn off the emergency switch, and then clean the cliff sensor with
a soft cloth.
1_VR7000_EN_DJ68-00763C-04_USA.indd 34 2017-04-14 오후 1:58:03