User Manual

ENGLISH-14
Using POWERbot
You must turn on the emergency switch on the bottom of the unit before using POWERbot.
Turning the power on/off
Press the button for more than
3 seconds
Starting Auto clean mode
Pressandreleasethisbutton.ThePOWERbot
movesandcleansallsetplacesuntilthebatteryis
depleted.
 Stopcleaning:Pressandreleasethe button
Recharging/Energy-saving
mode
fRecharging
YoucancommandPOWERbottorechargeatthe
dockingstationautomaticallywhileitiscleaning
bypressingthisbutton.
fEnergy-savingmode
Refertopage17.
Using Spot clean mode
ThePOWERbotcleansalocalizedareaintensely.
WARNING
•WhenPOWERbotisnotusedfor
30minutes,itwillreturntothecharger
tochargeitselfautomatically.
SR9300K_3ge_DJ68-00743A-08_AA.indb 14 2018-11-09 오후 3:22:35