User Manual
Table Of Contents
APPENDIX
Functions of the SmartThings App
Classication Functions Explanation
Monitoring
Cleaning Report
• You can check the result of the last cleaning.
• You can check the histories of last 50 cleanings.
Home Monitoring
• The Home monitoring feature utilizes a camera
on the front of the Jet Bot so you can view what
is in front of the Jet Bot.
• The Home monitoring function is turned on by
default. If you do not want to use the function,
press and hold the [
] and the [ ] at the same
time.
• The camera can be turned on via the
SmartThings App when cleaning to get a stream
of the activity.
Child care
• When your child arrives home, the robot vacuum
will go to the specied location to welcome them
home.
Control
Dock
• You can stop cleaning and have the Jet Bot
return to the Clean Station.
Pause • You can stop cleaning or restart cleaning.
Cleaning Mode • You can set the cleaning mode you want.
Suction Power • You can set the suction power.
Cleaning Functions
• You can set various cleaning functions.
– For some functions, you need to create a map
rst.
– For Room Clean, Around Furniture Clean and
Spot Clean, you can choose only one of them,
and the default setting is ‘All’ (All Rooms).
When the Jet Bot is in the Room Clean, the
Around Furniture Clean or the Spot Clean, it may
pass an unselected area to go to the cleaning
place or to recharge.
Room customization
• Optimize cleaning for each room with
customized options. [Suction power, detailed
driving settings (safe driving, allowable height
for entering under furniture)]
Schedule
• You can start designated cleaning at the
scheduled time.
English
36
1-DJ68-00846B-04_IB_VR9500_AA_EN.indd 36 2023-12-11 오후 3:13:15