User Manual
Table Of Contents
MAINTENANCE
Cleaning the Jet Bot
Before maintenance work, you should turn off the power switch at the side of the Jet Bot.
Emptying and cleaning the Dustbin
1 Detach the upper cover using the groove
under the cover.
2 Hold the Dustbin handle and lift the
Dustbin up.
3 Unlock the transparent clip at the side of
the Dustbin to open its Upper Cover.
4 Pull the Pre-motor Filter from the Dustbin.
5 Unlock the transparent clip at the bottom of
the Dustbin to open its Lower Cover.
6 Remove the dust on the lter and Dustbin,
clean them with water, and dry completely
in the shade.
MAINTENANCE
English
25
1_VR9500_EN_00846B-02_AA.indd 25 2022-10-12 오후 9:41:00