User Manual

English 43
• Make sure the lid is closed tightly before you start a load of laundry.
Delay End
You can set the washer to finish your wash automatically at a later time by choosing a
delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the
time the wash will finish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press and hold START/PAUSE.
4. To cancel Delay End, restart the washer by pressing POWER.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do this, you add the Delay End
option to the current cycle with a 3-hour setting, and then press and hold START/PAUSE at
2:00 pm. The washer starts operating at 3:00 pm and ends at 5:00 pm. Provided below is
the time line for this example.
2:00 pm
Set Delay End to 3 hours
3:00 pm
Start
5:00 pm
End
Sound Off
You can turn on or off the sound from the washing machine. Please note that this setting
does not affect the sound that notifies information codes.
• To mute the sound, hold down Extra Rinse simultaneously for 3 seconds.
• To unmute the sound, hold down again for 3 seconds.
Untitled-7 43 2024-01-03  2:21:26