User Manual

71
/ 78
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
11-19. Mullion Bar Ass’y
Step Description
1
2
□ Remark :
11. Disassemble/Assemble Procedures
※ Follow the reverse order when assembling.
Loosen 2 screws.
Grip the upper and lower side of the bar.
Push it up to remove.
Disconnect the mullion bar
heater(AC) connector.
※ Assemble Procedures
at Middle Hinge Part
Align the 2 screw holes on
the door with the mounting
holes on the middle hinge of
mullion bar after fitting two
hooks certainly.
And then tighten 2 screws.