User Manual

ManualsBrandsSamsung ManualsDomestic AppliancesWA8034B1

FEATURES 1

SAFETY INSTRUCTIONS 2

DESCRIPTION OF PARTS 3

CONTROL PANEL 4

WASHING PROCEDURE 5

Fuzzy course 5

Heavy course 5

Speedy course 5

Wool course 5

Saree course 5

Delay start course 6

MANUAL FUNCTIONS 6

INSTALLATION & MAINTENANCE 7

Environment 7

In case of pump-drained washer 7

Assembling the sound absorbing panel 7

Connecting the drain hose 7

Levelling 7

Connecting the water supply hose 7

Cleaning the magic filter 8

How to add the fabric softener 8

In case of cold-hot water washer 8

How to clean the filter 8

How to put the detergent in 8

How to Assemble the legs 8

TROUBLESHOOTING

SPECIFICATIONS

Before operating the unit, please read this manual

throughly, and retain for future reference.

Owner’s Instructions

Summary of content (10 pages)

PAGE 1
Owner’s Instructions Before operating the unit, please read this manual throughly, and retain for future reference.
PAGE 2
FEATURES FUZZY CONTROL F uzzy control operates with best washing course by sensing the washload like artificial intelligence. TRANSPARENT WINDOW This Transparent Window is the new concept to solve the curiosity of users to see inside of washing machine while operation. While operation, the laundry progress inside of washing machine can be checked by looking through the transparent window.
PAGE 3
SAFETY INSTRUCTIONS WARNING! To reduce the risk of fire, electric shock, or injury to persons when using your appliance, take care to adhere to the following precautions. Where an unearthed power cord is not fitted, be sure that the washer is grounded. To avoid electrical shock use metal piping for the ground connection. Take care not to ground the washer to gas pipes or telephone cables due to the danger of explosion from lightning strikes.
PAGE 4
DESCRIPTION OF PARTS LID Be sure to keep the lid closed during washing and spinning. WATER SUPPLY HOSE(HOT) WATER SUPPLY HOSE (COLD) DRAIN-HOSE (PUMP) FABRIC SOFTENER DISPENSER BLEACH INLET SPIN BASKET Stainless “CENTER-JET” PULSATOR POWER CORD MAGIC FILTER Lint will be collected in the filter during washing. FRONT CONTROL PANEL SOUND ABSORPTION PANEL GROUND LEAD When the water pipe is metal, make sure to cover the end of the ground wire.
PAGE 5
CONTROL PANEL 1. POWER BUTTON Press this button once to operate. Press once again to turn the washer off. 2. DELAY START BUTTON Press this button when delay start washing is needed. 4. 5. 7. FUNCTION SELECT BUTTON With every press of this button, the function changes; SOAK,WASH,RINSE,SPIN→WASH →RINSE→SPIN→ WASH&RINSE→RINSE&SPIN→WASH,RINSE,SPIN WATER SUPPLY SELECT BUTTON As you press this button, the type of water is selected as follows. COLD→COLD+HOT→HOT→COLD 8.
PAGE 6
WASHING PROCEDURE Before starting washing, check the following; Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose.(In case no drain pump) Put the laundry into the washer and add detergent,too. Be careful not to overload. Use right detergent for the fabrics you are washing. the best washing course FUZZY COURSE Selects automatically. 1. Press the POWER Button to"ON". POWER HEAVY COURSE 1. Press the power button to "ON". POWER 2.
PAGE 7
SAREE COURSE DELAY START COURSE Select this course when 1. Press the power button to "ON". 1. Press the power button to "ON". Select this course when you have to go out or do something else. POWER you have to go out or do something else. POWER 2. Press the course 2. Press the DELAY START select select button once. button twice. 3. Press the START/HOLD button Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again.
PAGE 8
INSTALLATION & MAINTENANCE ENVIRONMENT ASSEMBLING THE SOUND ABSORBING PANEL Leave some space Maintain at least 10cm between the washer and the wall. Place the washer on a sturdy flat surface. Tilt the washer a little and lift up the panel until it clicks, filnaly fix the panel with screw to the base as shown in the figure. If the washer is placed on an uneven or weak surface, noise or vibration occurs. (Allowable is 1 ) Rear-side Adjust the legs for even placement.
PAGE 9
CLEANING THE FILTER NET 1.Push the upper part of the filter and pull in. 2.Open the cover as shown in the figure. 3.Clean the filter. HOW TO ADD THE FABRIC SOFTENER ● When a proper amount (one time does) of fabric softener is stored in the softener inlet,it is automatically put in at the last rinsing cycle. ● Do not use detergent, bleach or starch into the Softener Inlet. ● Using too much softener may produce unsatisfactory results. ● Do not open the lid during the Spin Dry cycle.
PAGE 10
TROUBLESHOOTING Washing machine won't work Water dose not drain Is the water tap opened? Is the washer plugged in? Is the power cut off? Is there enough water? Is the drain hose down?(No pump) Is the drain hose frozen? Is the drain hose clogged? If the water dose not drain in 6 minutes, a buzzer will sound,and the remaining time indicator will show "E".