user manual

English
8
3. Arrange the monitor on each bracket following steps 1 and 2.
* Be careful not to catch your nger during installation.
Fine tuning
N After arranging the monitors, if they do not seem well-
proportioned, adjust them using the ne-tuning screws
on the brackets.
N Be sure not to leave any height differences or gaps
between the monitors.
1. Correcting height difference between the front and back
of a monitor.
• At the same time, pull the knob and turn the
adjustment screw clockwise.
The monitor will move forward.
To move the monitor backward, turn the screw
counterclockwise.
The ne-tuning screw’s maximum movement range is
5 mm.
Knob
<Moving the monitor forward>
<Moving the monitor backward>
BN68-01537H-00.indb 8 2012-10-29 오후 5:23:02