User manual

NOTE
9
If you are adding multiple Link Mates, connect all the Link Mate's to electrical outlets. If you are not
connecting all the Link Mates, refer to pages 39~41.
Press here
4 Wait until the pairing indicator on the Link Mate stops flashing. If the Link Mate's LED
indicator turns solid blue, pairing is complete. The Link Mate may also beep.
NOTES
9
Place each Link Mate at least 20 inches (50 cm) from the HUB when connecting them to the HUB.
9
Your smart device cannot connect to the Link Mate or the HUB if there is no wireless router.
9
To confirm you have a proper connection, check the pairing indicator on the front of the HUB.
- When you turn on the HUB for the first time, there is a 20 minute pairing period.
The pairing indicator (
) will blink for these 20 minutes or until pairing occurs. When you press
the SPK ADD button to pair additional Link Mates, the pairing period is reduced to 10 minutes. The
pairing indicator (
) flashes for 10 minutes or until pairing occurs. Turn on the Link Mate you
want to pair while the pairing indicator is flashing.
- If pairing mode has expired, press the SPK ADD button on the rear of the HUB to turn on pairing
mode again. Then, turn the Link Mate off and then on or press the DEVICE ADD button on the rear of
the Link Mate to link the Link Mate to the HUB.
9
For a proper connection, connect the HUB to your router before turning on the Link Mate.
- Connecting the Link Mate to the HUB may take a few minutes.
- There will be a brief sound when the connection is established.
5 Connect your smart device to your Wi-Fi network. (The HUB and the smart device should
be connected to the same router.)
6 Download the Samsung Multiroom app from Google Play or App Store.
19
44