User Manual(Web)

Connecting with a HUB (Not Included)

• If the product fails to connect to your network or its network connection operates

abnormally, place the product closer to the HUB or your router and try again.

• The product is a wireless network device. Its communications with your network may

be disrupted because of the distance between it and other devices on the network,

obstructions, or interference from other wireless devices.

1 Connect a LAN cable to the router and the ETHERNET SWITCH on the back of the

HUB.

NOTE

You can connect the LAN cable to any ETHERNET SWITCH Port on the HUB.

2 Attach the HUB's power cord to the power port on the rear of the HUB, and then plug

the power cord into an electrical outlet.

3 The power (

) and the HUB ( ) indicators on the HUB's front turn on.

When the pairing indicator (

) begins to flash, plug the product(s) into an outlet.

The LED indicator on the product starts to flash.

If the HUB's pairing indicator does not flash, press the SPK ADD button on the rear of

the HUB.

NOTE

If you are adding multiple Products, connect all the Product's to electrical outlets. If you are not

connecting all the Products, refer to pages 28~29.

Click here.

VOLUME

POWER

SPK ADD

Wi-Fi SETUP

WPS

ETHERNET

POWER

DC 14V 2.5A

Wireless Router

LAN

HUB

<WAM750, WAM751,

WAM350, WAM351>

<WAM550, WAM551>