QUICK SETUP GUIDE
Speaker Main Features Wi-Fi connection is recommended for this speaker Provides a wide range of sound sources, Internet radio available, and supports group play with multiple connections or stereo sound feature Features Multiroom feature Music service Wi-Fi Connect multiple devices at once Bluetooth One device connection Variety of music services available with the Samsung Multiroom App installation App per music service - Sound source service required - Internet radio (Tuneln) NOTE Bluetooth Set
Checking the Components MODE Do not place any items on top off or sit on the main unit Getting Started 1 Follow the installation steps in this user manual 2 Please download Samsung Multiroom app on your smart device · 2 · English
Installation 1 Make sure your smart device (Smart Phone, Tablet, PAD, etc) is connected to your Wi-Fi network NOTE All the devices need to connect to the same network Smartt d device i Router 2 On your smart device, download and install the Samsung Multiroom app Android iOS Samsung Multiroom app 3 Connect your speaker to power POWER POWER The power cord plug will be connected at an angle · 3 · English Speaker
Installation 4 Launch the Samsung Multiroom app on your smart device, and then follow the instruction on the screen to complete setup - Play music after speaker setup is complete Welcome Screen If Auto Set-up fails, follow the on-screen instructions NOTE If speaker setup continually fails, Press and hold the volume (+,-) buttons on top of the speaker simultaneously for five seconds to reset the speaker Next, restart the app and follow the displayed instructions to configure the speaker again · 4
Speaker Top Touch to select TV SoundConnect /Bluetooth/Wi-Fi Volume button Tap Play/Pause MODE OLED Display Previous Song VOL Swipe Next Song NOTES Tap/Swipe : Whole area is available except MODE, Volume (-,+) key area on the TOP The speaker will enter standby mode to reduce energy consumption after 15 minutes of idle time · 5 · English
Speaker Bottom POWER Connect the power cord plug to your speaker as shown below It will connect at an angle SPK ADD/Wi-Fi SETUP POWER POWER SPK ADD/Wi-Fi SETUP SERVICE1 SERVICE2 POWER Notch for Power Cable Shown: WAM5500 • WAM5500 SERVICE1/SERVICE2 Jack : For service only • WAM3500 SERVICE Jack : For service only · 6 · English
Using the Samsung Multiroom App (on Main Screen) 1 2 3 4 1 View the full list of connected speakers 2 Enter a keyword to search for the music desired 5 3 Access the settings menu 4 Select a source of music and play the music you want Scroll left or right to view different sources of music 5 A different screen is displayed according to the music source selected 6 6 Different categories of music are listed below the bar Scroll down to select your favorite categories of music NOTES Some of app
Connecting Additional Speakers You can add additional speakers Use an app to add speakers to the network 1 Connect the new speaker to an electrical outlet 2 On the main screen, touch at the top left to display a list of speakers 3 Touch More 4 Touch Add a New Speaker in the app, and then follow the instructions on the app screen · 8 · English
Using Multiple Speakers Setting up a group Group multiple speakers, connected over the same network, to play the same music via the speakers 1 On the main screen, touch at the top left to display a list of speakers 2 Touch next to the speaker name 3 Touch Group If you have more than two connected speakers, select the speakers you want to set up as a group, and then select Done NOTES If two speakers are available, touch Group to automatically group the speakers You cannot use Group with Bluet
Using Multiple Speakers Setting up Stereo Mode If connecting to a Samsung Smart TV over Wi-Fi, use multiple speakers to configure a surround sound system Refer to “Connecting to a Samsung Smart TV over Wi-Fi” for details Use multiple speakers to enjoy stereo sound 1 On the main screen, touch at the top left to display a list of speakers 2 Touch next to the speaker name 3 Touch Stereo Setup 4 Touch and hold a speaker, drag and drop it to a desired location, and then select Done NOTES If tw
Using Bluetooth® 1 Touch the MODE button on the TOP of your speaker one or more times until you hear “Bluetooth is ready ” 2 Enable Bluetooth on your smart phone, and then select [Samsung] R5 or [Samsung] R3 from the Bluetooth list [Samsung] R5 NOTE Without connection with Samsung Multiroom app, you might see “Samsung Wireless Audio” on your Bluetooth list 3 Use any music app on your device to play music on your speaker NOTE In Bluetooth mode, the Play/Pause/Next/Prev functions are available i
Connecting to a TV via TV SoundConnect (Bluetooth) TV SoundConnect allows an easy wireless connection between a Samsung TV and your speaker so you can enjoy listening to your TV’s sound through the speaker 1 Touch the MODE button one or more times until you hear “TV SoundConnect is ready ” NOTE TV SoundConnect can be used to connect a single speaker to a TV (to connect multiple speakers to a TV, refer to “Connecting to a Samsung Smart TV over Wi-Fi”) 2 Press and hold MODE button for 5 seconds to in
Connecting to a Samsung Smart TV over Wi-Fi What is the Wi-Fi surround sound connection? If your Samsung TV supports the Wi-Fi mode, connect the TV and audio devices on the same Wi-Fi network You can enjoy sound experience from the surround sound system Playing TV sound using the Soundbar and speakers Playing TV sound using speakers only (up to five speakers can be connected) Checklist before Connection ※ Check information for your TV model For connection to a TV over Wi-Fi, only Samsung Smart TVs, rel
Connecting to a Samsung Smart TV over Wi-Fi 1 Check to make sure that the Soundbar and audio device are connected to a (Wi-Fi) network NOTE Download the Samsung Multiroom app to your smart device, then follow the instructions in the app to connect the speakers and/or Soundbar to the (Wi-Fi) network 2 Check to make sure that the TV is connected to the network • How to check : Menu Network Network Status 3 Check to make sure that the TV, Soundbar and speakers are connected to the same network
Connecting to a Samsung Smart TV over Wi-Fi 1 Select Multiroom Link Type • Surround : Set up with 2 to 5 speakers Wireless Speaker Manager Other Audio Device ( ) Multiroom Link Type Multiroom Link Settings Surround Soundbar+Surround • Soundbar+Surround : Set up with one Soundbar and two speakers NOTE The surround sound system is not available with a combination of one Soundbar and one speaker 2 Select Multiroom Link Settings Select a speaker for each channel and select Save to complete config
Connecting to a Samsung Smart TV over Wi-Fi Connecting to a Samsung Smart TV released in 2015 Connecting a single speaker or Soundbar 1 On the TV menu, select Speaker List Menu Sound Speaker List 2 Select a connected speaker from the list of speakers Sound Sound Mode TV Speaker Standard HW-K850(HDMI) Sound Effect 3D Audio Make sure that “(Wi-Fi)” is included in the name Low HW-K850(Wi-Fi) Speaker List Additional Settings R1(Wi-Fi) Sound Customizer R3(Wi-Fi) Reset Sound IMPORTANT
Connecting to a Samsung Smart TV over Wi-Fi 2 With the speaker selected, press the right directional key on the remote control Select a speaker for each channel and select Save to complete configuration Connecting only a speaker TV Speaker R1(Wi-Fi) R3(Wi-Fi) Wi-Fi Surround Setup We’ve automatically configured your surround setup You can manually edit this configuration or select Exit to cancel Front Left [Samsung] R3 Front Right [Samsung] R1 Speaker Level Start Test Save Exit Connecting a speak
Connecting to a Samsung Smart TV over Wi-Fi Connecting to a Samsung Smart TV released in 2014 1 From the menus, select Multiroom Link - Settings Menu Sound Speaker Settings Multiroom Link - Settings Sound Speaker Settings Sound Mode Standard Sound Effect 3D Audio Low Speaker Settings Additional Settings Reset Sound TV Sound Output TV Speaker • TV Installation Type TV SoundConnect • Samsung Audio Device List • Add New Device Multiroom Link • Settings Bluetooth Headphone • Bluetooth Headphone L
Connecting to a Samsung Smart TV over Wi-Fi 3 Select the number of speakers to connect e g , one speaker 1CH, two speakers 2CH Settings 서라운드 Multiroom Link 2CH Front Left Front Right Rig [Samsung]R3 OK [Samsung]R3 Volume Level Speaker Test Edit Name 4 Select the speaker in the position you want and select OK Settings Settings Multiroom Link Surround Multiroom Link Surround 2CH Front Left 2CH Front Left Front Right Front Right [Samsung]R3 [Samsung]R3 [Samsung]R5 OK Volume Level
Principales caractéristiques de l’enceinte Une connexion Wi-Fi est recommandée pour cette enceinte. Offre une vaste gamme de sources de son et la radio Internet disponible en plus de prendre en charge Group Play avec connexions multiples ou la fonction stéréo. Caractéristiques Fonction Multiroom Service musical Wi-Fi Bluetooth Branchement à plusieurs périphériques en même temps. Connexion à un périphérique Une variété de services musicaux disponibles avec l’application Samsung Multiroom.
Vérification des composants MODE Il ne faut pas placer des objets ni s’asseoir sur l’unité principale. Pour démarrer 1. Suivez les étapes d’installation contenues dans le présent guide d’utilisation. 2. Veuillez télécharger l’application Samsung Multiroom sur votre appareil intelligent.
Installation 1. Assurez-vous que votre appareil intelligent (téléphone intelligent, tablette, assistant personnel, etc.) est connecté à votre réseau Wi-Fi. REMARQUE Tous les appareils doivent être connectés au même réseau. Appareilil A intelligent Routeur 2. Sur votre appareil intelligent, téléchargez et installez l’appli Samsung Multiroom. Android iOS Application Samsung Multiroom 3. Branchez votre enceinte à la source d’alimentation.
Installation 4. Lancez l’application Samsung Multiroom à partir de votre appareil intelligent, puis suivez les directives affichées à l’écran pour terminer l’installation. - Faites jouer de la musique une fois la configuration du haut-parleur terminée. Écran d’accueil Si la procédure de configuration automatique échoue, suivez les directives à l’écran.
Dessus de l’enceinte Appuyez pour sélectionner TV SoundConnect/ Bluetooth/Wi-Fi Touche de réglage du volume Appuyer Lecture/pause MODE Affichage OLED VOL Chanson Prochaine précédente chanson Glissement de doigt REMARQUES les Appuyer/Glissement de doigt : Toute la zone est disponible à l’exception de MODE, Volume(-,+) sur le DESSUS. L’enceinte passera au mode de veille pour réduire la consommation d’énergie après 15 minutes d’inactivité.
Dessous de l’enceinte POWER Branchez la fiche du cordon d’alimentation à votre enceinte de la façon illustrée ci-dessous. Elle se connecte en angle. SPK ADD/Wi-Fi SETUP POWER POWER SPK ADD/Wi-Fi SETUP SERVICE1 SERVICE2 POWER Encoche pour le cordon d’alimentation Ilustré : WAM5500 • WAM5500 Prise réservée à la SERVICE1/SERVICE2 : Pour des travaux de maintenance seulement. • WAM3500 Prise réservée à la SERVICE : Pour des travaux de maintenance seulement.
Utilisation de l’application Samsung Multiroom (à L’écran Principal) 1 tion 2 3 1 Affichez la liste complète des enceintes branchées. Saisir un mot clé, puis 4 2 rechercher la musique désirée. 3 Accédez au menu des paramètres. 5 4 Sélectionnez une source de musique et faites jouer la musique désirée. Balayez vers la gauche ou la droite pour voir les différentes sources de musique. 5 L’écran affiché change selon la source de musique sélectionnée.
Installation d’enceintes additionnelles Vous pouvez ajouter des enceintes supplémentaires Utilisez une appli pour ajouter des haut-parleurs au réseau. 1. Connectez la nouvelle enceinte à une prise électrique. 2. À l’écran principal, touchez des haut-parleurs. dans le haut à gauche pour afficher la liste 3. Appuyez sur More. 4. Touchez Add New Speaker dans l’appli, puis suivez les directives affichées.
Utilisation de plusieurs haut-parleurs Configuration d’un groupe Regroupez plusieurs haut-parleurs, connectés au même réseau, pour leur faire jouer la même musique. 1. À l’écran principal, touchez dans le haut à gauche pour afficher la liste des haut-parleurs. 2. Touchez à côté du nom du haut-parleur. 3. Appuyez sur Group. Si plus de deux enceintes sont branchées, sélectionnez les enceintes que vous voulez configurer en tant que groupe, puis sélectionnez Done.
Utilisation de plusieurs haut-parleurs Configuration du mode stéréo Lors de la connexion à un téléviseur Samsung Smart TV par Wi-Fi, utilisez plusieurs hautparleurs pour configurer un système de son ambiophonique. Consultez « Connexion à un téléviseur Samsung Smart TV par Wi-Fi » pour en savoir plus. Use multiple speakers to enjoy stereo sound. 1. À l’écran principal, touchez des haut-parleurs. dans le haut à gauche pour afficher la liste 2. Touchez à côté du nom du haut-parleur. 3.
Utilisation du Bluetooth 1. Appuyez sur la touche MODE sur le DESSUS de votre enceinte une ou plusieurs fois jusqu’à ce que vous entendiez « Bluetooth is ready. (Bluetooth est prêt.) ». 2. Activez la fonction Bluetooth sur votre téléphone intelligent, puis sélectionnez [Samsung] R5 ou [Samsung] R3 de la liste Bluetooth. [Samsung] R5 REMARQUE Sans connexion avec l’application Samsung Multiroom, vous pourriez voir « Samsung Wireless Audio » sur votre liste d’appareils Bluetooth. 3.
Connexion à un téléviseur par TV SoundConnect (Bluetooth) TV SoundConnect vous permet d’établir facilement une connexion sans fil entre un téléviseur Samsung et votre enceinte pour que le son puisse être restitué par l’enceinte. 1. Appuyez sur la touche MODE une fois ou plusieurs fois jusqu’à ce que vous entendiez « TV SoundConnect is ready. (TV SoundConnect est prêt.) ». REMARQUE La fonction TV SoundConnect peut être utilisée pour connecter un seul hautparleur à un téléviseur.
th) Connexion à un téléviseur Samsung Smart TV par Wi-Fi Qu’est-ce que la connexion Wi-Fi? i votre téléviseur Samsung prend en charge le mode Wi-Fi, connectezle au même réseau Wi-Fi que les appareils audio. Vous pouvez profiter de l’expérience sonore du système ambiophonique.
Connexion à un téléviseur Samsung Smart TV par Wi-Fi 1. Vérifiez que le Soundbar et l’appareil audio sont connectés à un réseau (Wi-Fi). REMARQUE Téléchargez l’appli Samsung Multiroom sur votre appareil intelligent, puis suivez les directives de l’appli pour connecter les haut-parleurs ou le Soundbar au réseau (Wi-Fi). 2. Vérifiez que le téléviseur est connecté au réseau. • Comment vérifier : Menu Réseau État du réseau 3.
Fi Connexion à un téléviseur Samsung Smart TV par Wi-Fi 2. Sélectionnez le Type Multiroom Link. • Surround : Gestionnaire des haut-parleurs sans fil Configuration de 2 à 5 haut-parleurs Autre appareil audio ( ) Type Multiroom Link Multiroom Link Settings Surround Soundbar+Surround • Soundbar+Surround : Configuration avec un Soundbar et deux haut-parleurs REMARQUE Le système de son ambiophonique n’est pas disponible avec une combinaison d’un Soundbar et d’un haut-parleur. 3.
Connexion à un téléviseur Samsung Smart TV par Wi-Fi Connexion à un téléviseur Samsung Smart TV fabriqué 2015 Connexion d’un haut-parleur ou d’un Soundbar unique 1. Dans le menu du téléviseur, sélectionnez Liste des haut-parleurs. Menu Son Liste des haut-parleurs 2. Sélectionnez un haut-parleur connecté dans la liste de haut-parleurs. Son Haut-parleur TV Son Mode Standard Effet sonore Audio 3D Liste des haut-parleurs Paramètres supplém. Bas Assurez-vous que le nom contient « (Wi-Fi) ».
Fi Connexion à un téléviseur Samsung Smart TV par Wi-Fi 2. Une fois le haut-parleur sélectionné, appuyez sur la touche de direction droite de la télécommande. Choisissez un haut-parleur pour chaque canal et sélectionnez Enregistrer pour terminer la configuration. Connexion d’un haut-parleur seulement Haut-parleur TV R1(Wi-Fi) R3(Wi-Fi) Configuration ambiophonique Wi-Fi Nous avons configuré automatiquement votre configuration ambiophonique.
Connexion à un téléviseur Samsung Smart TV par Wi-Fi Connexion à un téléviseur Samsung Smart TV fabriqué 2014 1. Depuis les menus, sélectionnez Multiroom Link - Paramètres.
Fi Connexion à un téléviseur Samsung Smart TV par Wi-Fi 3. Sélectionnez le nombre de haut-parleurs à connecter. P. ex. un haut-parleur 1CH, deux haut-parleurs 2CH Paramètres Multiroom Link Surround 2CH Avant dr droit Avant gauche [Samsung]R3 OK [Samsung]R3 Niveau du volume Test des haut-parleurs Entrer le nom 4. Choisissez le haut-parleur de la position que vous désirez et sélectionnez OK.
Country North America Contact Center Web Site U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca/support (English) www.samsung.