Multiroom App Guide

❚

Connecting to Wi-Fi manually

Depending on your network environment, the speaker(s) may not connect automatically. If this

occurs, you can set up the Speaker manually to connect to the network.

1 If an automatic connection fails, select Not Blinking.

2 WAM5500/WAM3500/WAM3501/WAM1500/WAM1501/

WAM1400 : On the lower part of the speaker, briefly press

SPK ADD/Wi-Fi SETUP and start Wi-Fi Setup.

Soundbar : After turning the speaker on, press and hold the

Wi-Fi SETUP button located at the back for 5 seconds.

WAM7500/WAM6500 : Press and hold the Play/Pause

and Standby buttons on the speaker simultaneously for

more than 5 seconds to initiate Wi-Fi Setup.

• After initiating Wi-Fi Setup, you have two minutes to

establish the Wi-Fi connection using your smart device.

SPK ADDWi-Fi SETUP

DC 24V

SPK ADD/Wi-Fi SETUP