User Manual

❚

Connecting the Power Cord

<WAM5500, WAM3500 Only>

1 Connect the power cord of your speaker

as shown. It will connect at an angle.

2 Push the power cord into the notch at the

edge of the speaker bottom. This lets the

speaker rest flat when you stand it up.

1 Connect the adaptor’s input power

cord to the adaptor.

2 Connect the adaptor’s output power

cord (with the round plug) to the DC

19V jack on the speaker.

3 Push the power cord into the notch at

the edge of the speaker bottom. This

lets the speaker rest flat when you

stand it up.

NOTE

Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that

it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the

Adapter and cause the Adapter to malfunction.

SPK ADD/Wi-Fi SETUP

SERVICE1 SERVICE2

POWER

ADD SPK/Wi-Fi SETUP

SERVICE1 SERVICE2

POWER

SPK ADD/Wi-Fi SETUP SERVICE

DC 19V