Washing Machine User manual WD85K6***** WD85K6410OW_03745S_EN.
Contents Contents Safety information 3 What you need to know about the safety instructions Important safety symbols Important safety precautions 3 3 4 Installation 17 What’s included Installation requirements Step-by-step installation 17 19 21 Before you start 27 Initial settings Laundry guidelines Detergent drawer guidelines 27 27 30 Operations 33 Control panel Simple steps to start Dry clothes Only Course overview Special features Settings 33 35 36 37 40 42 Maintenance 43 DRUM CLEAN Sma
Safety information What you need to know about the safety instructions Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance. Please store the manual in a safe location close to the appliance for future reference. Use this appliance only for its intended purpose as described in this instruction manual.
Safety information Safety information These warning signs are here to prevent injury to yourself and others. Please follow them explicitly. After reading this manual, store it in a safe place for future reference. Read all instructions before using the appliance. As with any equipment that uses electricity and moving parts, potential hazards exist. To safely operate this appliance, familiarize yourself with its operation and exercise care when using it.
Safety information 5. The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. 6. For appliances with ventilation openings in the base, that a carpet must not obstruct the openings. 7. For use in Europe: Children of less than 3 years should be kept away unless continuously supervised. CAUTION 8.
Safety information Safety information 17. The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged. 18. Remove all objects from pockets such as lighters and matches. WARNING 19. Never stop a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated. 20.
CAUTION Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer. Oil-affected items can ignit spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire.
Safety information Safety information Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, Kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer. Items such as foam rubber(latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in th tumble dryer.
WARNING The installation of this appliance must be performed by a qualified technician or service company. • Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury. Safety information Critical installation warnings The appliance is heavy, therefore take care when lifting it. Plug the power cord into an AC 220 - 240 V / 50 Hz wall socket or higher and use the socket for this appliance only. Never use an extension cord.
Safety information Safety information Do not install this appliance in a humid, oily or dusty location, or in a location exposed to direct sunlight or water (rain drops). Do not install this appliance in a location exposed to low temperatures. • Frost may cause the tubes to burst. Do not install this appliance in a location where gas may leak. • This may result in electric shock or fire. Do not use an electric transformer. • This may result in electric shock or fire.
CAUTION This appliance should be positioned in such a way that the power plug is easily accessible. • Failure to do so may result in electric shock or fire due to electric leakage. Install your appliance on a solid, level floor that can support its weight. • Failure to do so may result in abnormal vibrations, movement, noise, or problems with the product.
Safety information Safety information • Opening the door by force may result in damage to the product or injury. Do not insert your hand under the washing machine while an operation is in progress. • This may result in injury. Do not touch the power plug with wet hands. • This may result in electric shock. Do not turn the appliance off by unplugging the power plug while an operation is in progress.
CAUTION When the washing machine is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power plug and clean the washing machine using a damp, soft cloth. • Failure to do so may result in discolouration, deformation, damage, or rust. Safety information Usage cautions The front glass may be broken by a strong impact. Take care when using the washing machine. • If the glass is broken, it may result in injury.
Safety information Safety information Using the product for business purposes qualifies as a product misuse. In this case, the product will not be covered by the standard warranty provided by Samsung and no responsibility can be attributed to Samsung for malfunctions or damages resulting from such misuse. Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
Do not wash laundry contaminated by oils, creams or lotions usually found in skincare shops or massage clinics. • This may cause the rubber seal to become deformed and result in a water leak. Do not leave metal objects such as safety pins, hair pins or bleach in the drum for long periods of time. • This may cause the drum to rust. • If rust starts appearing on the surface of the drum, apply a (neutral) cleansing agent to the surface and use a sponge to clean it. Never use a metal brush.
Safety information Safety information Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use the a strong acidic cleaning agent. Do not use benzene, thinner or alcohol to clean the appliance. • This may result in discolouration, deformation, damage, electric shock or fire. Before cleaning or performing maintenance, unplug the appliance from the wall socket. • Failure to do so may result in electric shock or fire. 16 English WD85K6410OW_03745S_EN.
Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. What’s included 01 02 Installation Make sure all the parts are included in the product package. If you have a problem with the washing machine or the parts, contact a local Samsung customer centre or the retailer.
Installation Bolt caps Hose guide Cold water hose Hot water hose Liquid detergent container Installation Spanner Cap fixer NOTE • • • Bolt caps : The provided number (3 to 6) of bolt caps depends on the model. Hot water hose: Applicable models only. Liquid detergent container: Applicable models only. 18 English WD85K6410OW_03745S_EN.
Installation requirements Water supply AC 220-240 V / 50 Hz fuse or circuit breaker is required • Use an individual branch circuit specific to the washing machine To ensure proper grounding, the washing machine comes with a power cord featuring a three-prong grounding plug for use in a properly installed and grounded outlet. Check with a qualified electrician or serviceperson if you are not sure about the grounding. Do not modify the provided plug.
Installation Installation Flooring Alcove or closet installation For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads. Carpeting and soft tile surfaces are not a good resistance to vibrations and may cause the washing machine to move slightly during the spin cycle. Minimum clearance for stable operation: CAUTION Do NOT install the washing machine on a platform or a poorly supported structure.
Step-by-step installation STEP 1 Select a location Installation Location requirements: • Solid, level surface without carpeting or flooring that may obstruct ventilation • Away from direct sunlight • Adequate room for ventilation and wiring • The ambient temperature is always higher than the freezing point (0 ˚C) • Away from a heat source STEP 2 Remove the shipping bolts Unpack the product package and remove all shipping bolts. 1.
Installation STEP 3 Adjust the levelling feet Installation 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner. STEP 4 Connect the water hose The provided hose adaptor may differ with the model. This step guides you through connecting the connector-type adaptor. If you are provided with the screw-type adaptor, go to 7.
3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*). C E Installation C 4. Insert the adaptor into the water tap, and tighten the screws while lifting up the adaptor. 5. Turn part (C) in the arrow direction to tighten it. 6. While holding down part (E), connect the water hose to the adaptor. Then, release part (E). The hose fits into the adaptor with a clicking sound. 7.
Installation Installation 8. Connect the other end of the water hose to the inlet valve on the back of the washing machine. Turn the hose clockwise to tighten. 9. Open the water tap and check if there are any leaks around the connection areas. If there are water leaks, repeat the steps above. WARNING Stop using the washing machine if there is a water leak, and contact a local Samsung service centre. Otherwise, this may cause electric shock. CAUTION Do not stretch the water hose by force.
For models with an additional hot water inlet: Aqua hose (applicable models only) Installation 1. Connect the red end of the hot water hose to the hot water inlet on the back of the machine. 2. Connect the other end of the hot water hose to the hot water tap. The aqua hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak. A English 25 WD85K6410OW_03745S_EN.
Installation STEP 5 Position the drain hose The drain hose can be positioned in three ways: Installation Over the edge of a wash basin The drain hose must be placed at a height of between 60 cm and 90 cm (*) from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage.
Before you start Initial settings Run Calibration (recommended) Calibration ensures accurate weight detection by the washing machine. Make sure the drum is empty before running Calibration. Laundry guidelines Before you start 1. Power off, and then power on the washing machine. 2. Hold down Temp. and Delay End simultaneously for 3 seconds to enter Calibration mode. The “CB” message appears. 3. Press Start/Pause to run the Calibration cycle. 4.
Before you start STEP 2 Empty pockets Empty all the pockets of your laundry items • Metal objects such as coins, pins, and buckles on clothing may damage other laundry items as well as the drum. Turn clothing with buttons and embroideries inside out • Before you start • If pants or jacket zippers are open while washing, the drum may be damaged. Zippers should be closed and fixed with a string. Clothing with long strings may become entangled with other clothes.
STEP 6 Apply a proper detergent type The type of detergent depends on the type of fabric (cotton, synthetic, delicate items, wool), colour, wash temperature, and degree of soiling. Always use “low suds” laundry detergent, which is designed for automatic washing machines. NOTE • • Follow the detergent manufacturer’s recommendations based on the weight of the laundry, the degree of soiling, and the hardness of the water in your local area.
Before you start Detergent drawer guidelines The washing machine provides a three-compartment dispenser: the left compartment for the main wash, the middle compartment for fabric softeners, and the right compartment for the preliminary wash. Prewash compartment: Apply prewash detergent. 02 Main-wash compartment: Apply main-wash detergent, water softener, soaking detergent, bleach, and/or stain removers. 01 Before you start A 03 Softener compartment: Apply additives such as fabric softener.
3. Apply fabric softener to the softener compartment. Do not exceed the max line (A). A prewash detergent to the prewash compartment as instructed or recommended by the manufacturer. 5. Close the detergent drawer. Before you start 4. If you want to prewash, apply CAUTION • • • Do not apply powder detergent to the liquid container. Concentrated fabric softener must be diluted with water before applied. Do not apply main-wash detergent to the softener compartment. English 31 WD85K6410OW_03745S_EN.
Before you start To use liquid detergent (applicable models only) First insert the provided liquid container in the main-wash compartment. Then, apply liquid detergent to the container below the marked max line (A). CAUTION A • Before you start • Do not exceed the max line that is marked inside the container. Remove the liquid container if using powder detergent. 32 English WD85K6410OW_03745S_EN.
Operations Control panel 11 09 02 01 08 03 04 05 06 10 07 Turn the dial to select a course. 02 Display The display shows current course information and estimated time remaining, or an information code when a problem occurs. 03 Temp. Press to change the water temperature for the current course. 04 Rinse Press to change the rinse count for the current cycle. You can set the rinse count to a max of 5. 05 Spin Press to change the spinning speed for the current course.
Operations Press to select an option from Intensive , Prewash Intensive + Prewash . Press again to deselect. • Availability of the options depends on the cycle. , and 09 Delay End Delay End lets you set the end time of the current cycle. Based on your settings, the start time of the cycle will be determined by the machine’s internal logic. For example, this setting is useful for programming your machine to finish a wash at the time you normally return home from work.
Simple steps to start 2 1 4 6 3 5 Press Power to turn on the washing machine. Turn the Course Selector to select a course. Change the course settings (Temp., Rinse, Spin and Dry Level) as necessary. To add an option, press Options. Use the button again to choose a preferred item. The machine provides two easy to access buttons for Bubble Soak and Delay End for your convenience. If you want to use one of these options, press the corresponding button. 6. Press Start/Pause. 1. 2. 3. 4. 5.
Operations Dry clothes Only 1 2 4 3 Operations You can dry your clothes directly or dry the washed clothes according to the following procedures. 1. 2. 3. 4. Press Power button to turn on the washing machine. Turn the Course Selector to select the appropriate drying cycle. Press Dry Level button to select the appropriate drying mode. Press Start/Pause button to start dry. NOTE You can save water and power consumption by adding the Spin cycle to the selected dry course.
Course overview Standard courses Course Description • COTTON SYNTHETICS • For blouses or shirts that are made of polyester (diolen, trevira), polyamide (perlon, nylon), or the like. 4 • Specific for machine-washable wool for loads less than 2 kg. The wool course features gentle cradling and soaking to protect the wool fibres from shrinkage/distortion. A neutral detergent is recommended. 2 • Featuring a high-temperature wash and extra rinses to ensure that no powder detergent remains.
Operations Course Description This course is useful for removing bad odors. Turning the Cycle Selector cycles through the following operating modes.(Deodorization > Sanitization) DEODORIZATION - Reduces bad smells from the laundry. SANITIZATION - Deodorize and sanitize the laundry by stronger AIR Wash action with higher temp. - • For general drying. 6 • A low temperature drying cycle for heat-sensitive garments. 3 • Low temperature ecobubble cycle helps reduce power consumption.
Option Description • • Bubble Soak • Bubble Soak helps remove a variety of stubborn stains. With Bubble Soak selected, laundry is thoroughly soaked in water bubbles for effective washing. Bubble Soak is available with and adds up to 30 minutes to 3 cycles: Cotton, Synthetics, and Baby Care. Delay End You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments).
Operations Special features AddWash When the AddWash indicator turns on, you can stop operation of the machine and put additional laundry or softener into the drum. The Add Door opens by more than 130° for easy access. 1. Press Start/Pause to stop operation. 2. Press the upper area of the Add Door until you hear a clicking sound to unlock. Pull the handle of the Add Door to open. Operations 3. Open the Add Door and insert additional laundry or softener into the drum. 4.
CAUTION • • • • • • • • • Operations • Do not open the Add Door if suds have formed inside the drum that rise above the level of the Add Door. Do not attempt to open the Add Door while the machine is operating without first pressing Start/Pause. Please note that the Add Door can be opened unintentionally (without pressing Start/Pause) when the wash is complete. Do not add an excessive load through the Add Door. Performance may be degraded. Do not use the lower area of the Add Door as a handle.
Operations Operations Settings Child Lock Sound On/Off To prevent accidents by children, Child Lock locks all buttons except for Power. • To set the Child Lock function, hold down Temp. and Rinse simultaneously for 3 seconds. To activate, press Start/ Pause. • Before you press Start/Pause, you can still open the door or change settings by pressing corresponding buttons. Once you press Start/Pause to run the machine, Child Lock will be activated. You can turn on or off the key.
Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. DRUM CLEAN Perform this course regularly to clean the drum and to remove bacteria from it. 1. Press Power to turn on washing machine. 2. Turn the Cycle Selector to select DRUM CLEAN. 3. Press Start/Pause. NOTE The water temperature for DRUM CLEAN is set to 70 °C, which cannot be changed. CAUTION Do not use any cleaning agents for cleaning the drum.
Maintenance Smart check To enable this function, you must first download the Samsung Smart Washer app at the Play Store or the Apple Store, and install it on a mobile device featuring a camera function. Maintenance The Smart Check function has been optimized for Galaxy & iPhone series (applicable models only). 1. Press and hold Spin and Dry Level simultaneously for 3 seconds to enter the Smart Check mode. 2.
Using Dry course All drying options except for the Time Dry option detect the weight of the laundry in order to display a more accurate drying time and dry the laundry more effectively. Refer to the chart below to select the appropriate drying option according to the type and amount of laundry and the moisture you want to leave. Mode Auto Drying Manual Drying Drying option Load capacity(kg) Usage Cupboard Use this option to dry laundry such as cotton, underwear, and linen.
Maintenance AIR WASH The Air Wash function refreshes garments through Samsung’s unique air-washing technology without the need for water. Refer to the chart below for the usage and cycle time of each Air Wash cycle. Cycle Usage Deodorization Use this cycle to remove bad odors from the laundry. 29min Sanitization Use this cycle to remove bad odors and bacteria from the laundry. 59min NOTE • The recommended maximum load capacity for the Air Wash cycles is 1 kg or less (one or two items).
Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover (A) to open. A 3. Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while holding the tube cap (B). B Maintenance C 4. Open the tube cap and let water in the Emergency drain tube (C) flow into the container. 5.
Maintenance Cleaning Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. Add Door A 1. Open the Add Door. 2. Use a wet cloth to clean the Add Door. - Do not use cleaning agents. Discolouration may occur. - Use caution when cleaning the rubber packing and the locking mechanism (A). - Dust off the window area regularly. 3. Wipe up and close the Add Door until you hear a clicking sound.
Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord. 2. Close the water tap. 3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to prevent water from gushing out. NOTE If the mesh filter is clogged, an information code of “4C” appears on the screen. Maintenance 4. Use pliers to pull out the mesh filter from the inlet valve. 5.
Maintenance Pump filter It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A clogged pump filter may reduce the bubble effect. A 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum by referring to “Emergency drain” on page 47. 3. Gently press the top area of the filter cover to open. 4. Turn the pump filter knob (A) to the left, and drain off the remaining water. 5. Clean the pump filter using soft brushes.
Detergent Drawer A 1. While holding down the release lever (A) on the inner of the drawer, slide open the drawer. 2. Remove the release lever and the liquid detergent container from the drawer. 3. Clean the drawer components in flowing water using a soft brush. Maintenance 4. Clean the drawer recess using a soft brush. 5. Reinsert the release lever and the liquid detergent container to the drawer. 6. Slide the drawer inward to close it.
Maintenance Recovery from freezing The washing machine may freeze when it drops below 0 °C. 1. 2. 3. 4. 5. Turn off the washing machine, and unplug the power cord. Pour warm water over the water tap to loosen the water hose. Disconnect the water hose, and soak it in warm water. Pour warm water into the drum and leave it for about 10 minutes. Reconnect the water hose to the water tap. NOTE If the washing machine still doesn’t operate normally, repeat the above steps until it operates normally.
Troubleshooting Checkpoints If you encounter a problem with the washing machine, first check the table below and try the suggestions. Problem Action Does not start. • • • • • Fully open the water tap. Make sure the door is properly closed. Make sure the water supply hose is not frozen. Make sure the water supply hose is not kinked or clogged. Make sure there is sufficient water pressure. Water supply is insufficient, or no water is supplied.
Troubleshooting Problem Action • Excessive vibrations or makes noise. • • • • • • • • • Does not drain and/ or spin. • • Troubleshooting • • • • The door does not open. • • • Make sure the washing machine is installed on a level, solid floor that is not slippery. If the floor is not level, use the levelling feet to adjust the height of the washing machine. Make sure the shipping bolts are removed. Make sure the washing machine is not contacting any other object.
Problem Action • • Excessive suds. • • • • Cannot apply additional detergent. • • • • • Stops. • • Make sure the remaining amount of detergent and fabric softener is not over the limit. Make sure the Auto Dispense function is activated, with both the Water Hardness and Concentration settings properly specified. Plug the power cord into a live electrical outlet. Check the fuse or reset the circuit breaker. Close the door and press or tap Start/Pause to start the washing machine.
Troubleshooting Problem Action • • • • • Fills with the wrong water temperature. • • Load is wet at the end of a cycle. • • • Troubleshooting • Fully open both taps. Make sure the temperature selection is correct. Make sure the hoses are connected to the correct taps. Flush water lines. Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot water at the tap. Also, check the water heater capacity and recovery rate. Disconnect the hoses and clean the mesh filter.
Problem Action • Can I open the Add Door at any time? The Add Door can be opened only when the indicator appears. However, it does not open in the following cases: - When the boiling or drying process is running and the internal temperature becomes high. - If you set the Child Lock for safety reasons. - When the drum wash or drum drying cycle is running that does not involve additional laundry. If a problem persists, contact a local Samsung service centre.
Troubleshooting Information codes If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Problem Action 4C Water is not supplied. • Make sure the water taps are open. • Make sure the water hoses are not clogged. • Make sure the water taps are not frozen. • Make sure the washing machine is operating with sufficient water pressure. • Make sure that the cold water tap and the hot water tap are properly connected.
Problem Action OC Water is overflowed. • Restart after spinning. • If the information code remains on the display, contact a local Samsung service centre. LC LC1 Check the drain hose. • Make sure the end of the drain hose is placed on the floor. • Make sure the drain hose is not clogged. • If the information code remains, contact a customer service centre. NOTE When the washer displays the “LC”/“LC1” code, the washer do draining for 3 minutes. During this time, the Power button is inoperative.
Troubleshooting Troubleshooting Problem Action HC High temperature heating check • If the information code remains, contact a customer service centre. 1C The WaterLevel sensor is not working properly. • Try power off and restarting the cycle. • Check WaterLevel Sensor wire harness. • If the information code remains, contact a customer service centre. NOTE When the washer displays the “1C” code, the washer do draining for 3 minutes. During this time, the Power button is inoperative.
Specifications Fabric care chart The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximize garment life and reduce laundry problems.
Specification Protecting the environment • • • Specification • This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the door so that animals and small children cannot get trapped inside the appliance. Do not exceed the detergent quantities recommended in the detergent manufacturer’s instructions.
Specification sheet “ * ” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). Type Front loading washing machine Model name WD85K64**** Dimensions W600 x D650 x H850 (mm) Water pressure 50 kPa ~ 800 kPa NET weight 71 kg Wash and spin capacity 8.5 kg Dry capacity 6.
Memo WD85K6410OW_03745S_EN.
Memo WD85K6410OW_03745S_EN.
QUESTIONS OR COMMENTS? COUNTRY CALL AUSTRALIA 1300 362 603 OR VISIT US ONLINE AT www.samsung.com/au/support DC68-03745S-00 WD85K6410OW_03745S_EN.
