Washing Machine User manual WD9*T******/WD8*T****** U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
Contents Safety information 4 English What you need to know about the safety instructions Important safety symbols Important safety precautions To minimize the risk of fire in a tumble dryer, the following should b observed Critical installation warnings Installation cautions Critical usage warnings Usage cautions Critical cleaning warnings 4 4 5 8 10 11 11 13 15 Installation 16 What’s included Installation requirements Step-by-step installation Environment 16 18 20 29 Before you start 30 Initial
53 Drum Clean+ Emergency drain Cleaning Detergent drawer Defrosting your washing machine Care against an extended time of disuse 53 54 55 58 59 59 Troubleshooting 60 Checkpoints Information codes 60 64 Specifications 67 Fabric care chart Protecting the environment Spare parts guarantee Specification sheet 67 68 68 69 English U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
Safety information English Congratulations on your new Samsung washing machine. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washing machine’s many benefits and features. What you need to know about the safety instructions Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
Important safety precautions English WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 2.
Safety information English 6. For appliances with ventilation openings in the base, that a carpet must not obstruct the openings; 7. For use in Europe: Children of less than 3 years should be kept away unless continuously supervised. 8. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. 9.
English 15. Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. 16. Fabric softeners, or similar products, should be used as specified by the fabric softener instructions. 17. The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged. 18.
Safety information English 23. This appliance is intended to be used in household only and it is not intended to be used such as: –– staff kitchen areas in shops, offices and other working environments; –– farm houses; –– by clients in hotels, motels and other residential type environments; –– bed and breakfast type environments; –– areas for communal use in blocks of flats or in launderettes.
Plastic articles such as shower caps or babies’ waterproof napkin covers should not be placed in a tumble dryer. English Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes an rubber-coated tennis shoes should not be placed in a tumble dryer. Do not dry unwashed items in the tumble dryer(or washing machine drying mode,etc).
Safety information Critical installation warnings English WARNING The installation of this appliance must be performed by a qualified technician or service company. • Failure to do so may result in electric shock, fire, an explosion, problems with the appliance, or injury. The appliance is heavy, therefore take care when lifting it. Plug the power cord firmly into a wall socket that meets local electrical specifications. Use the socket for this appliance only, and do not use an extension cord.
Do not pull or excessively bend the power cord. English Do not twist or tie the power cord. Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord into the space behind the appliance. • This may result in electric shock or fire. Do not pull the power cord when unplugging the power plug. • Unplug the power plug by holding the plug. • Failure to do so may result in electric shock or fire.
Safety information English Make sure to remove the packaging (sponge, styrofoam) attached to the bottom of the washing machine before using it. Do not wash items contaminated with gasoline, kerosene, benzene, paint thinner, alcohol or other inflammable or explosive substances. • This may result in electric shock, fire, or an explosion. Do not open the washing machine door by force while it is operating (high-temperature washing/drying/ spinning).
Usage cautions English CAUTION When the washing machine is contaminated by a foreign substance such as detergent, dirt, food waste, etc., unplug the power cord and clean the washing machine using a damp, soft cloth. • Failure to do so may result in discolouration, deformation, damage, or rust. The front glass may be broken by a strong impact. Take care when using the washing machine. • If the glass is broken, it may result in injury.
Safety information English Water drained during a high-temperature wash or drying cycle is hot. Do not touch the water. • This may result in burns or injury. Draining time may vary depending on the water temperature. If the water temperature is too high, the draining process starts after the water cools down. Do not wash, spin, or dry water-proof seats, mats, or clothing (*) unless your appliance has a special cycle for washing these items.
English Do not use water from water cooling/heating devices. • This may result in problems with the washing machine. Do not use natural hand-washing soap for the washing machine. • If it hardens and accumulates inside the washing machine, it may result in problems with the appliance, discolouration, rust, or bad odours. Place socks and brassieres in a washing net and wash them with the other laundry. Do not wash large laundry items such as bedding in the washing net.
Installation Follow these instructions carefully to ensure proper installation of the washing machine and to prevent accidents when doing laundry. English What’s included Make sure all the parts are included in the product package. If you have a problem with the washing machine or the parts, contact a local Samsung customer centre or the retailer.
English Spanner Bolt caps Hose guide Cold water hose Hot water hose Liquid detergent guide (applicable models only) Cap Fixer (applicable models only) Accessories (not supplied) • Stacking kit : SK-DH -- Staking kit is required to stack a dryer on a washing machine. NOTE • Spanner: For removing the shipping bolts and levelling the washing machine. • Bolt caps: For covering the holes after removing the shipping bolts. The provided number of bolt caps (3 to 6) depends on the model.
Installation Installation requirements English Electrical supply and grounding Water supply • AC 220-240 V / 50 Hz fuse or circuit breaker is required. • Use an individual branch circuit specific to the washing machine. A proper water pressure for this washing machine is between 50 kPa and 800 kPa. Water pressure less than 50 kPa may cause the water valve to not close completely, or it may take longer to fill the drum, causing the washing machine to turn off.
Alcove installation For best performance, the washing machine must be installed on a solid floor. Wood floors may need to be reinforced to minimise vibration and/or unbalanced loads. Carpeting and soft tile surfaces do not resist vibration well and may cause the washing machine to move slightly during the spin cycle. Minimum clearance for stable operation: CAUTION Do NOT install the washing machine on a platform or a poorly supported structure.
Installation Step-by-step installation English STEP 1 Select a location Location requirements: • • • • • Solid, level surface without carpeting or flooring that may obstruct ventilation Away from direct sunlight Adequate room for ventilation and wiring The ambient temperature is always higher than the freezing point (0 °C) Away from a heat source NOTE • To prevent excessive vibration while operating the washing machine, consider stability before anything else.
English 1. Locate the shipping bolts (marked with circle in the figure) on the rear side of the washing machine. CAUTION Do not remove the screw (A) that fixes the hose clip. 2. Using the supplied spanner, loosen all the shipping bolts by turning them anticlockwise. NOTE You must keep the shipping bolts for future use. A English U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
Installation English 3. Insert the bolt caps (B) to the holes (marked with circle in the figure). B 22 English U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
STEP 3 Adjust the levelling feet English 1. Gently slide the washing machine into position. Excessive force may damage the levelling feet. 2. Level the washing machine by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner. CAUTION When installing the product make sure the levelling feet is not pressing the power cord.
Installation STEP 4 Connect the water hose English The provided water hose may differ depending on the model. Please follow the instruction according to the provided water hose. Connecting to a threaded water tap 1. Connect the water hose to the water tap, and then turn it to the right to tighten. CAUTION Before connecting the water hose, make sure there is a rubber washer in the hose connector. Do not use the hose if the washer is damaged or missing. 2.
CAUTION English Do not stretch the water hose by force. If the hose is too short, replace the hose with a longer, highpressure hose. Connecting to a non-threaded water tap 1. Remove the adaptor (A) from the water hose (B). A B 2. Use a Phillips screwdriver to loosen four screws on the adaptor. 3. Hold the adaptor and turn part (C) in the arrow direction to loosen it by 5 mm (*). C 4. Insert the adaptor onto the water tap, and then tighten the screws while lifting the adaptor. 5.
Installation English 6. While pulling down part (D) on the water hose, connect the water hose to the adaptor. Then, release part (D). The hose fits into the adaptor with a clicking sound. D 7. To complete connecting the water hose, see 2 and 3 on the “Connecting to a threaded water tap” section. NOTE • After connecting the water hose to the adaptor, pull the water hose down to check if it is connected properly. • Use a popular type of water taps.
Aqua stop hose (applicable models only) English The aqua stop hose alerts users of a risk of water leaks. It senses the water flow and turns red on the centre indicator (A) in case of a leak. A NOTE The end of the aqua stop hose must be fitted to the water tap and not the machine. English U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
Installation STEP 5 Position the drain hose English The drain hose can be positioned in three ways: Over the edge of a wash basin A The drain hose must be placed between 60 cm and 90 cm (*) above from the floor. To keep the spout of the drain hose bent, use the supplied plastic hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage. In a drain pipe The drain pipe should be between 60 cm and 90 cm high (*). It is advisable to use a 65 cm high vertical pipe.
In a sink drain pipe branch English The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground. (*) : 60 cm CAUTION Remove the lid on the sink drain pipe branch before connecting the drain pipe to it. STEP 6 Power on Plug the power cord into a wall socket that is correctly rated, grounded, and protected by a fuse or circuit breaker. Then, tap to turn on the washing machine.
Before you start Initial setup English • When you turn on the washing machine for the first time, the screen shows the initial setup process. Follow the on-screen instructions to complete it. • Initial setup will not repeat after you’ve completed it. • The initial setup includes language selection, calibration, and a brief tutorial. • Tap or turn the Navigation dial to skip to the next screen. Run Calibration • Initial setup includes the calibration process which comes after the language selection.
Laundry guidelines English STEP 1 Sort Sort the laundry according to these criteria: • • • • Care Label: Sort the laundry into cottons, mixed fibres, synthetics, silks, wools, and rayon. colour: Separate whites from colours. Size: Mixing different sized items together in the drum improves the washing performance. Sensitivity: Wash delicate items separately using an Easy Iron option for pure, new woollen items, curtains, and silk items. Check the labels on the items.
Before you start STEP 5 Determine the load capacity English Do not overload the washing machine. Overloading may cause the washing machine to not wash properly. For the load capacity for the type of clothing, see page 40. NOTE When washing bedding or bedding covers, the wash time may be lengthened or the spin efficiency may be reduced. For bedding or bedding covers, the recommended maximum spin cycle speed is 800 rpm, and the load capacity is 2.0 kg or less.
Laundry capsules English To get the best results from using laundry capsules, please follow these instructions. 1. Put the capsule in the bottom of the empty drum towards the rear. 2. Put the laundry in the drum on top of the capsule. CAUTION For cycles using cold water or cycles that complete in less than one hour, the capsule may not dissolve completely. English U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
Before you start Detergent drawer guidelines English The manual dispenser models provide a three-compartment dispenser: the left compartment for the main wash, the centre for fabric softeners, and the right for the preliminary wash. A 1. Prewash compartment: Apply prewash detergent. 2. Main-wash compartment: Apply main-wash detergent, water softener, soaking detergent, bleach, and/or stain removers. 3. Softener compartment: Apply additives such as fabric softener. Do not exceed the max line (A).
English 3. Apply fabric softener to the softener compartment. Do not exceed the max line. 4. If you want to prewash, apply prewash detergent to the prewash compartment as instructed or recommended by the manufacturer. 5. Close the detergent drawer. CAUTION • Do not apply powder detergent to the liquid detergent container. • Concentrated fabric softener must be diluted with water before applied. • Do not apply main-wash detergent to the softener compartment.
Before you start To use liquid detergent manually (applicable models only) English First insert the provided liquid detergent container in the main-wash compartment. Then, apply liquid detergent to the container below the marked max line (A). A 36 English U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
Operations Control panel English 04 02 01 03 10 05 06 07 08 09 Tap to turn the washing machine on or off. 01 Power • If you do not manipulate the control panel for 10 minutes after the washing machine is turned on, the washing machine automatically turns off. • The washing machine automatically turns off when the cycle completes. CAUTION to turn the washing machine off while the wash cycle is in Do not tap progress.
Operations Tap to change the spin speed for the selected cycle. English • The indicator above the button indicates the default or selected setting. 08 Spin 09 Additional function Tap to enter the additional functions menu. Tap and hold for 3 seconds to enter the system functions menu. Tap to activate or deactivate the Smart Control function. Tap and hold to enter pairing mode to connect to the SmartThings app.
Operating a cycle English 2 1 6 5 1. Tap 3 4 turn on the washing machine. 2. Turn the Navigation dial to select the cycle you want. -- For more information on Cycle overview, see page 40. 3. Tap , , or to change the default cycle settings. 4. Tap , and then turn the Navigation dial to select additional function. -- For more information on Additional functions, see page 43. to change the settings for selected additional function. 5. Tap -- Not all cycles have additional functions available.
Operations Cycle overview English Max load (kg) • For cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the rinse count are automatically adjusted according to the load. • For cleaning lightly soiled cotton items at a nominal temperature of 20 °C. WD8*T****** Cotton Description WD9*T****** Cycle Max For lightly soiled items in less than 2.0 kg that you want to wash quickly. 15' Quick Wash 40 • Use less than 20 g of detergent.
WD8*T****** Description WD9*T****** Cycle Towels • For bath towels, washcloths, and mats. 4 Bedding • For bed spreads, bed sheets, bedding covers, etc. • For best results, wash only 1 type of bedding and make sure the load weighs less than 2.0 kg. 2 Shirts • For shirts, blouses that are made of cotton, synthetic fiber. 2 Hygiene Steam • Cotton and linen fabric which have been in direct contact with the skin, such as underwear.
Operations Description WD8*T****** Cycle WD9*T****** English Max load (kg) Rinse+Spin • Featuring an additional rinse process after applying fabric softener to the laundry. Max Drain/Spin • For draining the water inside the drum and running an additional spin process to effectively remove moisture from laundry. Max Drum Clean+ (WD**T9*****, WD**T7*****, WD**T6***** models only) • Cleans the drum by removing dirt and bacteria from it.
Additional Functions English Using Additional Functions 1. Tap . 2. Turn the Navigation dial to select the desired additional function. to change the selected function’s settings or start the function. 3. Tap NOTE again or turn the Navigation dial to select Back and tap . • To return to the main screen, tap • If the selected function is not supported, the “Currently not supported” message is displayed, and the button is not activated.
Operations Intensive English For badly soiled laundry. The operation time for each cycle is longer than normal. 1. Select a cycle and change the cycle settings as necessary. 2. Tap . 3. Turn the Navigation dial to select Intensive, and then tap 4. Tap and hold . . Bubble Soak This function helps remove a wide variety of stubborn stains. With Bubble Soak selected, laundry is thoroughly soaked in water bubbles for effective washing. 1. Select a cycle and change the cycle settings as necessary. 2. Tap .
Delay End English You can set the washing machine to finish your wash automatically at a later time, choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle and change the cycle settings as necessary. 2. Tap . 3. Turn the Navigation dial to select Delay End, and then tap . 4. Turn the Navigation dial to select the desired time, and then tap . 5. Tap and hold .
Operations System functions English Using System Functions 1. Tap and hold for 3 seconds. 2. Turn the Navigation dial and select the desired system function, and then tap 3. Tap . to change the selected function’s settings or start the function. NOTE To return to the main screen, tap again or turn the Navigation dial to select Back and tap . AI Pattern This function saves frequently used cycles and settings.
Wi-Fi 1. Tap and hold English You can turn the washing machine's Wi-Fi on or off. for 3 seconds. 2. Turn the Navigation dial to select Wi-Fi, and then tap . 3. Tap to select On or Off. -- The washing machine's Wi-Fi is off as a factory default setting. However, the washing machine's Wi-Fi turns on automatically when you turn on the washing machine for the first time. Then, the final Wi-Fi setting maintains regardless of the washing machine power status.
Operations Special features English AddWash (applicable models only) To add laundry after the wash starts, use the AddWash door. 1. Tap and hold to stop the wash cycle. 2. Press the upper area of the AddWash door to unlock the door. The door will move inward slightly when you press it and then open. 3. Open the AddWash door fully, and then insert additional laundry through the AddWash door into the drum. 4.
English • When using hot water for the wash, the AddWash door may appear to leak water after opening and closing the AddWash door. This is normal, simply because steam emerging from the open AddWash door has cooled and formed water drops on the surface. • When the AddWash door closes, the door seals up and no water can leak. However, you may encounter what appears to be water leak around the door - some residual water remaining around the AddWash door may form water drops. This is normal.
Operations English • If the washing machine's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you turn of the power. Stay Connect Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a cycle. Your washing machine stays connected to the app so you can send additional instructions, whether you are at home or away. 1.
SmartThings English Wi-Fi connection On your smartphone or tablet, go to Settings and turn on the wireless connection and select an AP (Access Point). • This appliance supports the Wi-Fi 2.4 GHz protocols. Download On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps), find the SmartThings app with a search term of “SmartThings”. Download and install the app on your device. NOTE The app is subject to change without notice for improved performance.
Operations Open Source Announcement English The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by contacting our support team via http://opensource.samsung.com (Please use the “Inquiry” menu.) It is also possible to obtain the complete corresponding source code in a physical medium such as a CDROM; a minimal charge will be required. The following URL http://opensource.
Maintenance Keep the washing machine clean to prevent deteriorated performance and to preserve its life cycle. English Drum Clean+ Perform this cycle regularly to clean the drum by removing bacteria from it. This cycle heats the water between 60 °C and 70 °C, and it also removes accumulated dirt from the rubber door gasket. 1. Tap . 2. Turn the Navigation dial to select Drum Clean+. 3. Tap and hold . CAUTION • Do not use any cleaning agents for cleaning the drum.
Maintenance Emergency drain English In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off and unplug the washing machine from the electrical outlet. 2. Gently press the top area of the filter cover to open. 3. Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while holding the tube cap (A). A 4. Open the tube cap and let water in the emergency drain tube (B) flow into the container. 5.
Cleaning English Surface of the washing machine Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine. AddWash door (applicable models only) 1. Open the AddWash door. 2. Use a wet cloth to clean the AddWash door. -- Do not use cleaning agents. Discolouration may occur. -- Use caution when cleaning the rubber packing and the locking mechanism (A). -- Dust off the door area regularly. A 3. Wipe up and close the AddWash door until you hear a clicking sound.
Maintenance Mesh filter English Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washing machine, and unplug the power cord. 2. Close the water tap. 3. Loosen and disconnect the water hose from the back of the washing machine. Cover the hose with a cloth to prevent water from gushing out. 4. Use pliers to pull out the mesh filter from the inlet valve. 5. Submerge the mesh filter deeply in water so that the threaded connector is also submerged. 6.
Debris filter English It is advisable to clean the debris filter every 2 months to prevent its clogging. A clogged debris filter may reduce the bubble effect. 1. Turn off the washing machine, and unplug the power cord. 2. Drain the remaining water inside the drum. See the Emergency drain section. 3. Gently press the top area of the filter cover to open. 4. Turn the debris filter knob to the left, and drain off the remaining water. 5. Clean the debris filter using soft brushes.
Maintenance Detergent drawer English 1. While holding down the release lever inside the drawer, slide open the drawer. 2. Clean the drawer components in flowing water using a soft brush. 3. Clean the drawer recess using a soft brush. 4. Reinsert the liquid detergent container to the drawer. 5. Slide the drawer inward to close it. NOTE Make sure the drawer recess is completely dry before inserting the detergent drawer.
Defrosting your washing machine English The washing machine may freeze when it drops below 0 °C. 1. Turn off the washing machine, and unplug the power cord. 2. Pour warm water over the water tap to loosen the water hose. 3. Disconnect the water hose, and soak it in warm water. 4. Pour warm water into the drum and leave it for about 10 minutes. 5. Reconnect the water hose to the water tap. NOTE If the washing machine still doesn’t operate normally, repeat the above steps until it operates normally.
Troubleshooting If there is any problem, check the information message on the LCD screen and follow the on-screen instructions. English If the problem persists, please contact the service center. Checkpoints If you encounter a problem with the washing machine, first check the table below and try these suggestions. Problem Action • • • • • • Does not start. • • • • • • • Water supply is insufficient, or no water is supplied. After a cycle, detergent remains in the detergent drawer.
Action Excessive vibrations or makes noise. • Make sure the washing machine is installed on a level, solid floor that is not slippery. If the floor is not level, use the levelling feet to adjust the height of the washing machine. • Make sure the shipping bolts are removed. • Make sure the washing machine is not in contact with any other object. • Make sure the laundry load is balanced. • The motor can cause noise during normal operation.
Troubleshooting Problem Action English Excessive suds. • Make sure you use the recommended types of detergent as appropriate. • Use high efficiency (HE) detergent to prevent oversudsing. • Reduce the detergent amount for soft water, small loads, or lightly soiled loads. • Non-HE detergent is not recommended. Cannot add additional detergent. • Make sure the remaining amount of detergent and fabric softener is not over the limit. Stops. • Plug the power cord into a live electrical outlet.
Problem Action Has odours. • • • • No bubbles are seen (Bubble models only). • You may not be able to see bubbles if there is too much items in the drum. • Severely contaminated laundry may not generate bubbles. Can I open the AddWash door at any time? • The AddWash door can be opened only when the indicator appears.
Troubleshooting Information codes English If the washing machine fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action Water is not draining. Check drainage • Make sure the drain hose is not frozen or clogged. • Make sure the drain hose is positioned correctly, depending on the connection type. • Clean the debris filter as it may be clogged. • Make sure the drain hose is straightened all the way to the drain system.
Code Action English This message appears when you open the Add Door without pressing Start/ Pause (Hold to Start). If this happens, do one of the following: Addwash door is open (applicable models only) • Press the Add Door to close properly. Then, press and hold Start/Pause (Hold to Start) and try again. • To add laundry, open the Add Door and input laundry. Close the Add Door properly. Then, press and hold Start/Pause (Hold to Start) to resume operation. Water has overflowed.
Troubleshooting Code Action English The MEMS sensor is not working properly. 8C • Turn the machine off, and restart the cycle. • If the information code remains, contact a customer service centre. Check communications between the main and the inverter PBAs. AC6 • Depending on the state, the machine may automatically returns to normal operation. • Turn the machine off, and restart the cycle. • If the information code remains, contact a customer service centre.
Specifications Fabric care chart English The following symbols provide garment care directions. The care labels include four symbols in this order: washing, bleaching, drying and ironing (and dry cleaning when necessary). The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow the care label directions to maximise garment life and reduce laundry problems.
Specifications Protecting the environment English • This appliance is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations. Cut off the power cord so that the appliance cannot be connected to a power source. Remove the lid so that animals and small children cannot get trapped inside the appliance. • Do not exceed the detergent quantities recommended in the detergent manufacturers’ instructions.
Specification sheet English “*” Asterisk(s) means variant model and can be varied (0-9) or (A-Z). E D A C B Type Front loading washing machine Model name WD95T**4*** A (Width) Dimensions 600 mm B (Height) 850 mm C (Depth) 600 mm 690 mm (WD**T*8****, WD**T*5****) D 680 mm (WD**T*3****, WD**T*0****) E Water pressure 50-800 kPa Net weight 80 kg Maximum load capacity Power consumption 1120 mm Washing and heating Dry Washing and spinning 9.5 kg Drying 6.
Specifications Type Front loading washing machine English Model name Dimensions WD85T**4*** A (Width) 600 mm B (Height) 850 mm C (Depth) 650 mm 740 mm (WD**T*8****, WD**T*5****) D 730 mm (WD**T*3****, WD**T*0****) E 1170 mm Water pressure 50-800 kPa Net weight Maximum load capacity Power consumption Washing and heating Dry 68 kg Washing and spinning 8.5 kg Drying 6.
English English U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT AUSTRALIA 1300 362 603 (Other) www.samsung.com/au/support NEW ZEALAND 0800 726 786 (All Product) www.samsung.com/nz/support DC68-04199R-00 U-PJT_COMBO-MD_SimpleUX_DC68-04199R-00_EN.
