computer WF10-1 3/7/02 4:59 PM Page 1 Chapter 1 Computer Basics This section allows you to have an over all look at your new computer. It shows you how to turn the computer On/Off and how to use the basic devices such as keyboard, mouse, etc.
computer WF10-1 3/7/02 4:59 PM Page 6 SAMSUNG ComputerWF10 WF10 SAMSUNG Computer Looking at your computer Front View Note The ◆ indicates an optional item. The particular item may not be included with your model or may be different from what is actually provided. CD Storage space You may store your recovery/software CDs.
computer WF10-1 3/7/02 4:59 PM Page 7 Back View Note The mark indicates mandatory devices that must be connected. Mouse port (PS/2) Keyboard port (PS/2) Serial device port Printer (LPT) port Telephone port (for connection when needed) Telephone line port (for communications via a modem) Analog monitor port Sound card Digital (DVI) monitor port The default setup for the graphics card output is set on analog. You may change the setting to digital when using an LCD monitor.
computer WF10-1 3/7/02 4:59 PM Page 8 SAMSUNG ComputerWF10 WF10 SAMSUNG Computer Keyboard components The keyboard is a device which is used to input data. You have the option to choose between standard or wireless keyboards. Function keys Additional keys Windows keys Application key Directional keys Numeric keys ■ Function keys Executes the various program functions. Their use varies according to the program ■ Additional keys Moves the cursor up/down or to the front or back of a line.
computer WF10-1 3/7/02 4:59 PM Page 9 Special keys Special keys are located at the top of your keyboard. You can use these keys to make use of your computer more conveniently. Connect to the Internet Run Norton AntiVirus Skip/Search Mail Receipt display Power Save key Program keys USER 1 key: Run Explorer USER 2 key: Run Calculator USER 3 key: Run Note Pad Stop Play/Pause Skip/Search Open CD Drive Mute Volume control ■ Power save key Executes the Power save standby mode.
computer WF10-1 3/7/02 4:59 PM Page 10 SAMSUNG ComputerWF10 WF10 SAMSUNG Computer Using the mouse The mouse is a device used to move and/or control the cursor or pointer on the display. Note You have the option of choosing a standard or wireless mouse with your computer. Therefore, your mouse may be different from what is described here. Wheel dial Right button Left button The pointer on your computer’s display moves in the direction in which you move the mouse.
computer WF10-1 3/7/02 4:59 PM Page 11 ■ The functions of the mouse Function Execution method To move the pointer Move Move your mouse to the direction of your choice, the pointer will move accordingly. To select an item Click Place your mouse on the item and click once on your left mouse button To run a program or open a file or folder Doubleclick Swiftly click twice on your left mouse button. To open the shortcut menu Click on Click on the item with the right mouse right mouse button.
computer WF10-1 3/7/02 4:59 PM Page 12 SAMSUNG Computer WF10 Turning computer On/Off To turn computer On 1. Connect all the peripheral devices according to instructions in the Installation Guide. 2. Turn the Monitor and other peripheral equipment ON. 3. Press the Power button to turn your computer ON. If you have multiple users registered, click on User Name in the Start Menu.
computer WF10-1 3/7/02 4:59 PM Page 13 To turn computer Off 1. Click on start on the Taskbar and click on Turn Off Computer. 2. Click Turn Off from the [Turn Off Computer] window. If your computer does not turn Off, press on the power button for five seconds to turn it off manually. Caution When you turn your computer Off manually. The Hard Drive may be exposed to damage due to electric waves flowing within the computer.
computer WF10-1 3/7/02 4:59 PM Page 14 SAMSUNG ComputerWF10 WF10 SAMSUNG Computer Wa r i n g When using a circuit breaker If you use a circuit breaker (rated 30A/30mA ELB), you can use up to twelve computer systems (including the monitors) simultaneously. However, if excessive electricity flow causes the circuit breaker to suspend power, you may run the risk of losing data in your computer. For a safe usage environment, we recommend the acquisition of about 30% margin.
computer WF10-1 3/7/02 4:59 PM Page 15 Proper Seating Posture During Computer Use The proper seating posture during computer use is provided here. Maintaining proper posture during computer use enhances performance and prevents physical bodily harm. If necessary, use a footrest to raise the level of your knees and ease the pressure on the thighs. Seating Posture - Position the chair so that the eyes are slightly higher than the display panel. - Straighten the neck and back. - Place the legs naturally.
computer WF10-1 3/7/02 4:59 PM Page 16 SAMSUNG Computer WF10 16 SAMSUNG Computer WF10
Computer WF10-2 3/7/02 5:03 PM Page 1 Chapter 2 Using your computer This section shows your how to use the Windows OS and CD Drive, as well as how to use the application programs that use these devices.
Computer WF10-2 3/7/02 5:03 PM Page 2 SAMSUNG Computer WF10 Windows XP Basics Windows is the computer’s main operating system, which needs to be familiarized with in order for efficiently computer use. Windows XP Tour Accessories ▼ All Programs ▼ Or click Start Tour Windows XP. ▼ Click Start ▼ A tour of the elementary functions provided by Windows XP. Tour Windows XP. Click on the topics to find out about important functions of Windows XP. Click the Title.
Computer WF10-2 3/7/02 5:03 PM Page 3 Understanding the Desktop The Desktop is the working area on the computer. It consists of the large workspace, which is more or less the entire the screen and a Taskbar at the bottom. Start Menu Recycle Bin Language Bar Start Button Taskbar System Tray with Clock Start Button Opens the Start Menu. Taskbar Displays programs that are currently running. Frequently used icons can be placed here. Recycle Bin Deleted files or folders end up here.
Computer WF10-2 3/7/02 5:03 PM Page 4 SAMSUNG Computer WF10 Understanding the Start Menu The Start Menu includes everything that is required to start Windows. From the Start Menu it is possible to run a program, open a file, assign system users with the Control Panel, receive support by clicking Help and Support, and search desired items from computer or Internet by clicking Search.
Computer WF10-2 3/7/02 5:03 PM Page 5 Understanding a Window Click Start ▼ A window is the basic component in working with the computer. The My Computer window, which is a window for the computer’s hard drive, will be used as an example here to show the basic composition of a window. My Computer. Folder Icon Title Bar Close Window Button Menu Bar Maximize Button Minimize Button Folders Quick Task Window Click Shared Files or the Local Disk to view the folders and files in it.
Computer WF10-2 3/7/02 5:03 PM Page 6 SAMSUNG Computer WF10 Help and Support Center Click Start ▼ Help and Support Center provides references and troubleshooting information regarding computer use. Help and Support. Displays Help Index Search Related help information appears when a search keyword is entered. Connect to Support Center. The computer has to be connected to the Internet Help Topics Computer information can be viewed and the problem can be diagnosed.
5:03 PM Page 7 Document Operations To create documents, WordPad or NotePad, which is included in Windows, or a separate specialized word processor program can be used, such as MS Word. Instructions for creating documents using WordPad is provided here. 1. Click Start All Programs Accessories ▼ ■ Creating a New Document ▼ 3/7/02 ▼ Computer WF10-2 WordPad. 2. Create and edit your document. For more information about WordPad, refer to on-line Help. ■ Saving a Document 1.
Computer WF10-2 3/7/02 5:03 PM Page 8 SAMSUNG Computer WF10 Accessories ▼ All programs ▼ 1. Click Start ▼ ■ Opening a Document WordPad. 2. Select File From the Menu, and click Open. 3. Click on the Look in field and specify the folder in which the file is saved. 4. Select the file to open and click Open. ■ Printing a Document To print a document, connect a printer to the computer. For more information about connecting and configuring a printer, please refer to the printer manual.
Computer WF10-2 3/7/02 5:03 PM Page 9 Using your CD Drive You may enjoy various multimedia functions on your computer with use of music, movie, game, etc. CDs. Note The CD Drive is an optional item. Your computer comes with CD Drive, DVD Drive, or DVD Combo Drive. What is a DVD Combo? It is a device that allows the use of both the CD-RW (read & write) and DVD functions. The user must install the necessary programs in order to use the DVD Combo.
Computer WF10-2 3/7/02 5:04 PM Page 10 SAMSUNG Computer WF10 Caution Do not touch the data storage side (side opposite the label) of the CD. Foreign particles on this side may prevent the CD from playing properly. Hold the CD by its hole in the center and edge. 3. Slightly press the CD Tray back in. Or, press the Open button again. The CD Tray will close. Note If the CD does not play properly, use a clean cloth to clean the CD. Clean the CD from the center hole, outward.
Computer WF10-2 3/7/02 5:04 PM Page 11 To Play an Audio CD 1. Insert an audio CD into the CD drive, and a list of all available players is displayed automatically. 2. Select Windows Media Player and click OK to play the audio CD. Note If the Always do the selected action box is checked, the selected program automatically launches whenever an audio CD is inserted.
Computer WF10-2 3/7/02 5:04 PM Page 12 SAMSUNG Computer WF10 2. Press the CD Drive Open button and insert an audio CD. 3. Press the CD Tray slightly to close. The CD will begin Play. 4. Press the AUDIO Button again to exit function. To Play a Video CD 1. Insert a video CD into the CD drive. 2. When a video window appears, double-click the MPEGAV folder. 3. Double-click the DAT file. 4. When a warning window appears, click the Open with button. 5.
Computer WF10-2 3/7/02 5:04 PM Page 13 Adjusting volume You may adjust overall volume or the volume of a particular input/output device. ■ Adjusting overall volume Use the Volume Adjust key on your keyboard or the volume adjusts dial on the front of the computer. Adjust Volume Mute Adjusting volume in the Control Panel ▼ Note 1. After clicking on start Control Panel, click on the Sounds, Speech, and Audio Devices Icons. 2. Click on the Sounds and Audio Devices icon. 3.
Computer WF10-2 3/7/02 5:04 PM Page 14 SAMSUNG Computer WF10 ■ Using the front digital sound output jack(S/PDIF-Optical) 1. Double-click on the ESS Canyon3D 2 Audio Properties ( ) icon on the Taskbar. 2. Select the S/PDIF tab and make check the Enable S/PDIF Out item. Note When using the 5.1 channel speakers, use the volume control on the speakers to adjust the volume. ■ Setting up the rear digital sound output jack (S/PDIF-Coaxial)/Analog(5.
3/7/02 5:04 PM Page 15 To Write Data in CD The CD-RW drive can copy data onto a blank CD, or create an audio CD. Caution Writing onto blank CDs can only be done in CD-RW drives. ■ Writing Data 1. Insert a blank CD into the CD-RW drive. 2. Click Open Writable CD folder and click OK. The CD drive window will appear automatically. Note If the “Always do the selected action” box is checked, the selected program automatically launches whenever a blank CD is inserted. 3.
Computer WF10-2 3/7/02 5:04 PM Page 16 SAMSUNG Computer WF10 4. Select, drag and drop folders or files to copy onto the CD-ROM drive window. Click Write Files to CD in the CD-ROM drive window. CD-ROM drive window 1. Drag and drop folders or files to copy 2. Click Write Files to CD My Computer window 5. When the CD Write Wizard appears, enter the CD label, and click Next. The data will begin copying. 6.
Computer WF10-2 3/7/02 5:04 PM Page 17 Using a PC (PCMCIA) Card 1. Press the marked section of the PC cover. Press here. 2. Hold the Insert Display part of the PC Card outward and push inward. The Insert Display part faces outward 3. To remove the PC Card press the eject button on top. Press firmly on the eject button to remove the PC Card. Chapter 2.
Computer WF10-2 3/7/02 5:04 PM Page 18 SAMSUNG Computer WF10 How to play a DVD title You must install a separate program found in the SAMSUNG DVD installation CD in order to play a DVD title. Note A DVD title may only be played in the DVD or DVD Combo drives. The DVD or DVD Combo Drives are optional items. Caution To play a DVD title, we recommend that you use the SAMSUNG DVD program.
5:04 PM Page 19 Using the Internet The Internet refers to a network that connects many computers worldwide like a wide area network (WAN). When you connect to the Internet, you will have access to endless useful information and you will be able to send/receive e-mail. My Computer Internet Service Provider (ISP) Worldwide Network ▼ ■ To connect to the Internet First, you will need a network card installed.
Computer WF10-2 3/7/02 5:04 PM Page 20 SAMSUNG Computer WF10 Network configuration You need to setup the network to meet the needs of your usage environment. Note Network ▼ 1. Start Control Panel Network and internet Connections Connections double-click on Local Area Connection. ▼ ▼ ▼ You will need to have a Nework Card and Network Driver installed on your computer to configure the network environment.
Computer WF10-2 3/7/02 5:04 PM Page 21 3. To setup IP, select ‘Use the following IP address’, click the IP address and DNS server address, then click OK. However, when using the DHCP (automatic Setup), select ‘Obtain an IP address autonmatically. 4. Restart your computer when Network setup is complete. Chapter 2.
Computer WF10-2 3/7/02 5:04 PM Page 22 SAMSUNG Computer WF10 38 SAMSUNG Computer WF10
computer WF10-3 3/7/02 5:08 PM Page 1 Chapter 3 Maintaining your computer In this section you will learn how to manage your Hard Drive, use the environment setup utility “BIOS Setup” and customizing a number of system functions to fit your needs.
computer WF10-3 3/7/02 5:08 PM Page 2 SAMSUNG Computer WF10 Managing Hard Drive Windows offers a utility that maintains the data stored in the Hard Disk in their optimal status. ■ Inspecting a Hard Disk error 1. Click on start ▼ You can inspect external file, folder, and Hard Disk errors and make repairs to damaged items. My computer. 2. Place your mouse on the Hard Drive and click on the right mouse button and click on Properties. 3. Select the Tools tab and click on the Check Now… button.
5:08 PM Page 3 ■ Disk Defragmenter System Tools ▼ Accessories ▼ 1. Click on Start All Programs Defragmenter. ▼ Reorganizes the Hard Disk’s file and unused space to allow faster program execution. ▼ Disk 2. Select the Drive that you wish to defragment and click on Defragment. Your computer will begin defragmenting. Select the Drive to be defragmented. Caution If you are connected to a network, please log off before you execute Defrag.
computer WF10-3 3/7/02 5:08 PM Page 4 SAMSUNG Computer WF10 2. Select those files to be deleted and click on OK. Select files to be deleted. 2. Click on “Yes” in the Disk Cleanup window. Your computer will begin Disk Cleanup. ■ System Restore Click on Start All Programs Accessories System Tools Restore, select the task to be executed, then click on Next. ▼ ▼ ▼ ▼ This function allows you to cancel changes that may cause system errors and revert to previous setup.
5:08 PM Page 5 Checking for Viruses A Virus is a program designed to damage the computer files and/or data. Infections occur via the Internet or from other computers. You may use the Norton AntiVirus Virus vaccination program. 1. Click on Start All Programs Norton AntiVirus ▼ ■ Inspecting for Viruses ▼ 3/7/02 ▼ computer WF10-3 Norton AntiVirus 2002.
computer WF10-3 3/7/02 5:08 PM Page 6 SAMSUNG Computer WF10 Managing power You can conserve energy by using the Power Options to setup for power save mode that will turn the components off after a set period of time, etc. ■ Setting up power Saving time 1. Click on Start ▼ You may setup for Turn Off Monitor and Hard Disk, System standby Mode, System hibernates Mode. Control Panel. ▼ 2. Click on Performance and Maintenance Power Options. 3.
computer WF10-3 3/7/02 5:08 PM Page 7 ■ To restart when you’re in System standby or System hibernates mode You may restart your computer by pressing on any key on your keyboard or mouse when you are in the System standby mode. However, because the wireless mouse will not operate, please use your wireless keyboard. In the System hibernates mode, press on the power button to restart your computer. Chapter 3.
computer WF10-3 3/7/02 5:08 PM Page 8 SAMSUNG Computer WF10 Using the BIOS Setup Utility Setup is an environment setup utility that sets up the computer’s environment to be recognizable by the computer system. To execute BIOS Setup Utility 1. Turn your computer On. 2. When the booting display appears (SAMSUNG, etc.), press the F2 key. The setup window will be displayed.
computer WF10-3 3/7/02 5:08 PM Page 9 ■ What can I setup in the BIOS Setup Utility? You are offered 5 different menu items in Setup. Main menu You may see the computer’s basic specifications or change their setup. Advanced menu You may setup peripheral devices, etc. as well as the main chipset. Security menu You may setup your password as well as other security related items. Boot menu You many change booting sequence (CD, HDD, FDD) or setup other items relative to booting.
computer WF10-3 3/7/02 5:08 PM Page 10 SAMSUNG Computer WF10 Setting up Password If you assign a Password, the computer will verify that password upon turning on your computer or executing BIOS setup. The Password can protect data and/or files in your computer by restricting use by other users. ■ Setting up Password 1. Execute BIOS Setup Utility by referring to instructions on entering setup in the previous section. 2. Press on the key to move to the Security menu once Setup is executed. 3.
computer WF10-3 3/7/02 5:08 PM Page 11 3. Press Enter in the Setup Notice window. 4. Press F10 and then hit Enter. ■ When you forget Password You must change the Password jumper on your computer motherboard and delete the Password. 1. Turn your computer off and open the computer case. (Refer to Chapter 4 disassembling computer) 2. Change the Motherboard jumper no. 1 (JP1) jumper to 2-3. 1-2 to Note The ▼ Jumper no. 1 (JP1) 2-3 displays number 1. 3. Turn your computer on.
computer WF10-3 3/7/02 5:08 PM Page 12 SAMSUNG Computer WF10 Editing the booting sequence The computer’s booting sequence are setup in the order of CD –ROM Drive, Removable Devices, and Hard Drive. This sequence may be changed according to the user’s needs. For example, below shows you how you can setup your computer to boot up with the Hard Drive first. 1. Refer to Setup execution instruction in the previous section to enter BIOS Setup Utility. 2.
computer WF10-3 3/7/02 5:08 PM Page 13 Changing the wireless switch The computer, wireless mouse and wireless keyboard have a switch that can send and receive input/output signals. If you are using more than one computer and the switch setup is identical; the signals will get mixed, causing a computer error. In such circumstances, the computer, keyboard, and mouse switch must be changed to different numbers.
computer WF10-3 3/7/02 5:08 PM Page 14 SAMSUNG Computer WF10 Using two monitors You may use 2 monitors on your computer by using the TwinView function. Note The TwinView function may be used only with models that come with graphics cards that support this function. 1. Click on the right button of your mouse on the Desktop and click on Properties. 2. Select the Settings tab and click on Advanced. 3. Select the mode of your choice in the TwinView tab and click on Apply.
computer WF10-4 3/7/02 5:12 PM Page 1 Chapter4 Upgrading your computer This section shows you how to disassemble your PC for system upgrades.
computer WF10-4 3/7/02 5:12 PM Page 2 SAMSUNG Computer WF10 Disassembling computer You will need to open the computer cover to replace your parts or upgrade your PC. The components and/or internal architecture may vary depending on optional specifications. Wa r n i n g There is a danger for serious potential damage when your computer is exposed to electric shock. Please unplug the power cord before your begin disassembling.
computer WF10-4 3/7/02 5:12 PM Page 3 3. Pull the cover open while holding the part with arrows. The Cover Stopper (Lid safety Latch) will pop out when you open the cover. Cover Stopper (Lid safety Latch) 4. To reassemble the cover, pull the Cover Stopper(Lid safety Latch) into the inward and close the cover. And push the marked “PUSH”. ■ Disassembling the power supply unit 1. Unplug the power cords that is connected to the Motherboard as well as various drives. 2.
computer WF10-4 3/7/02 5:12 PM Page 4 Samsung SAMSUNG Computer WF10 Computer’s internal components Note The internal architecture and/or components of your computer may vary according to optional specifications.
computer WF10-4 3/7/02 5:12 PM Page 5 Motherboard components Cooling fan/Heat sink/ CPU(Central Processing Unit) Ventilation fan power connector Cooling fan power connector Memory socket Main power connector Secondary power connector Primary drive connector (PRI IDE) Secondary drive connector (SEC IDE) AMR card slot AGP card slot PCI card slot Password delete jumper (JP1) Front I/O board connector (USB) Front I/O board connector (IEEE 1394) Wake Up LAN connector Front PCMCIA connector Wireles
computer WF10-4 3/7/02 5:12 PM Page 6 SAMSUNG Computer WF10 Adding various cards Check for available expansion slots on your computer and verify whether the particular card is compatible with your computer. 1. Remove the fixed Bracket on the expansion slot you wish to use. Place a cross-shaped screwdriver in the groove and flip slightly towards the front. Note Your computer’s back view may vary according to optional specifications 2. Open the Computer Cover.
computer WF10-4 3/7/02 5:12 PM Page 7 4. Place your card in the slot and push until it is completely inserted. Wa r n i n g The computer may not function properly, or the motherboard may be damaged if the card is not inserted properly. Please take special care to insert the card properly. Wa r n i n g If it is difficult to insert the card because the connectors are too long You can insert the card more easily if you rest the cover on the Cover Stopper(Lid safety Latch).
computer WF10-4 3/7/02 5:12 PM Page 8 SAMSUNG Computer WF10 Upgrading memory Check for available memory expansion slots on your motherboard. Prepare memory chips that are compatible with your computer. 1. Open the Computer Cover. (Refer to instructions on disassembling computer) 2. Push the clips on each side of the memory socket. Clips 3. Place the memory chip in the socket and push inward until it is inserted properly.
computer WF10-4 3/7/02 5:12 PM Page 9 Replacing/adding drives Replacing the Hard Drive 1. Open the Computer Cover. (Refer to instructions on disassembling computer) 2. Unplug the Hard Drive cable and then unscrew the 2 screws to remove the Hard Drive Case. 3. Pull the Hard Drive case about 1cm upward and remove it by pushing it inward. Chapter 4.
computer WF10-4 3/7/02 5:12 PM Page 10 SAMSUNG Computer WF10 4. Remove the 2 screws on each side of the Hard Drive case and remove the Old Hard Drive. Insert the New Hard Drive and mount it in place with 4 screws. 5. Select the new Hard Drive Jumper as the Master and install the Hard Drive bracket with 2 screws. (Please refer to the Hard Drive user’s manual or instructional label) 6. Connect the Signal Ribbon Cable and Power Cable. 7. Assemble the Computer Cover and Pedestal. 8.
computer WF10-4 3/7/02 5:12 PM Page 11 Adding additional Hard Drive This computer comes with 1 Hard Drive. You may add 1 additional Hard Drive to your computer. 1. Open the Computer Cover. (Refer to instructions on disassembling computer) 2. Install the Additional Hard Drive bracket on the right side of the exiting Hard Drive using 2 screws. 3. Assign the new Hard Drive jumper to Slave. (Please refer to the Hard Drive user’s manual or instructional label) 4.
computer WF10-4 3/7/02 5:12 PM Page 12 SAMSUNG Computer WF10 6. Insert the new Hard Drive in the Hard Drive expansion slot. Mount it properly according to the additional Hard Drive bracket suspension ledge and hook it on. 7. Push the 2 spots on the bottom, which is hooked on and remove by pulling the front cover towards the front. The spots which are hooked on 8. Press the spots marked “PUSH” on the cover and place the 2 screws in the grooves to mount the Hard Drive in place.
computer WF10-4 3/7/02 5:12 PM Page 13 Replacing the CD Drive This section will show you how to replace your existing CD Drive with another CD Drive, CD-RW, or DVD-Combo. Caution When replacing the CD Drive, a certain CD Drive door may not function properly according to CD Drive type. Please take care to buy a new CD Drive. 1. Open the Computer Cover. (Refer to instructions on disassembling computer) 2. Unplug the Power Cable/Signal Ribbon Cable/Sound Output Cable. 3.
computer WF10-4 3/7/02 5:12 PM Page 14 SAMSUNG Computer WF10 4. Assign the new CD Drive Jumper as the Master and insert it in the bracket. 5. Mount CD bracket in place as below illustration, the right side cover of the bracket to be shown in outward. And fix CD Drive right side by screwing the 2 screws and then fix the opposite side with 2 screws. Cover of the bracket to be shown in outward. 6. Connect the Power Cable/Signal Ribbon Cable/Sound Output Cable.
computer WF10-4 3/7/02 5:12 PM Page 15 Setting up your Drive sequence You must setup the priority sequencing of the newly installed Drives so that your computer can recognize them. ■ What is the Drive priority sequencing? The Drive Connector(Ribbon Cable) and Jumper Setup determine the priority sequencing for Drive recognition. Note You may connect 2 Hard Drives to the primary connector. The CD drive is connected to the secondary connector.
computer WF10-4 3/7/02 5:12 PM Page 16 SAMSUNG Computer WF10 ■ Example of a drive sequence setup Sequence 1 2 3 Cable type Primary Hard Drive cable Secondary Hard Drive cable Jumper setup Master Master Current status Drive text Hard Drive (C:\ ) With 1 additional Drive Hard Drive text Hard Drive (C:\ ) Wa r n i n g Slave CD Drive (D:\ ) Added Hard Drive (E:\ ) CD Drive (D:\ ) Hard Drive over 60GB may be divided into 2 different partition drives (C:\ and D:\).
computer WF10-4 3/7/02 5:12 PM Page 17 Replacing the CPU Wa r n i n g When you disassemble the CPU The heat sink and CPU have been plastered together with heat transfer material. Using excessive force to disassemble these parts may result in damage to the CPU. Operate the computer for a sufficient period of time so that the heat created softens the adhesive material, before disassembling the units. 1. Open the Computer Cover. (Refer to instructions on disassembling computer) 2.
computer WF10-4 3/7/02 5:12 PM Page 18 SAMSUNG Computer WF10 6. Replace with a new CPU. You must line up the PIN on the socket with the PIN on the CPU when inserting the CPU in place. ▼ Line up the section of the socket without PIN holes with the section of the CPU marked with a , to insert. 7. Lock the CPU socket lever in place and attach the Heat Sink and Cooling Fan. 8. Hook one of the Cooling Fan’s Clips then push on the handle to fix in place.
computer WF10-5 3/7/02 5:18 PM Page 1 Chapter 5 Troubleshooting This section describes how to troubleshoot problems on your computer and recover regular operations.
computer WF10-5 3/7/02 5:18 PM Page 2 SAMSUNG Computer WF10 Are you having problems with your PC? When your computer is not functioning properly, follow the procedures below. Norton AntiVirus ▼ 3. Using Windows Help. Click Start Help and Support. 72 SAMSUNG Computer WF10 ▼ ▼ 2. Check for Viruses. Start All Programs ▼ 1. Check connections. Check to confirm those peripheral devices such as the monitor, printer, speaker, power cable, etc. are properly connected to your computer.
computer WF10-5 3/7/02 5:18 PM Page 3 4. Program reinstallation Use the System Software CD to reinstall the programs and/or drivers for which you are experiencing errors. If the problem persists, use the System Recovery CD to reinstall Windows. SYSTEM SOFTWARE CD display SYSTEM RECOVERY CD display Note To prevent errors on your computer Use the computer management programs frequently to maintain your system at its peak. (Refer to Chapter 3 Maintaining your computer) Chapter 5.
computer WF10-5 3/7/02 5:18 PM Page 4 SAMSUNG Computer WF10 Reinstalling your Software If you are experiencing problems with certain software, you may use the System Software CD to reinstall that particular software(s). If the problem persists, try reinstalling the proper device driver. ■ Running the System Software CD Insert the System Software CD in your CD drive and the install window will appear automatically. You may install device Drivers. You may install programs. ■ Installing programs 1.
computer WF10-5 3/7/02 5:18 PM Page 5 Program installation display ■ Installing drivers 1. Click Install Driver in the Start Menu. 2. Click the driver of your choice and click Install. Note For drivers that do not appear on the installation window and drivers for in other operating systems except Windows XP? Refer to the instructions on the System Software CD jacket to install. Chapter 5.
computer WF10-5 3/7/02 5:18 PM Page 6 SAMSUNG Computer WF10 Reinstalling Windows XP If Windows do not operate properly, you may use your System Recovery CD to reinstall the Operating System(Windows). Caution If you reinstalled Windows, the colors on your computer display will not be expressed properly. Please reinstall the video drivers and/or application from your software CD to correct this problem. ■ Installing Windows 1. Place the System Recovery in the CD Drive.
computer WF10-5 3/7/02 5:18 PM Wa r n i n g Page 7 When you choose User Installation you pose the risk of deleting existing data. Please backup all important data before you reinstall Windows. ■ Installing Windows You may boot up with the System Recovery CD to reinstall Windows. Wa r n i n g When you use the System Recovery CD to boot up your computer.
computer WF10-5 3/7/02 5:18 PM Page 8 SAMSUNG Computer WF10 Q&A The following is frequently asked questions regarding the use of your computer, and their answers. When turning your computer ON Q I’m getting the ‘Invalid system disk, Replace the disk, and then press any key’ message. A You have a general diskette in the floppy drive. Take the general diskette out or replace with a booting diskette and press any key on the keyboard to resume. Q I’m getting the ‘Operating system not found’ message.
computer WF10-5 3/7/02 5:18 PM Page 9 Q I’m getting the ‘CMOS Checksum error’ message. A This message may appear when the CMOS backup battery on the mother board is dead. Refer to disassembling computer and replace the battery. Then setup the BIOS Setup Utility accordingly. Q My computer is booting up in Safe Mode This message appears when there is an error in the Hard Drive connection or BIOS Setup Utility. Please check these items.
computer WF10-5 3/7/02 5:18 PM Page 10 SAMSUNG Computer WF10 Windows and Windows Displays Q My computer has frozen while using an application program. A1 There is an error in the application program. Press ,, simultaneously and click End Task in the [Windows Task Manager] window. A2 You must Restart your computer when you run into a Windows error. Press the power button to Restart your computer. Q My monitor is blink. A1 Check if the monitor power is On.
computer WF10-5 3/7/02 5:18 PM Page 11 Q I can’t input anything on my keyboard A1 Check if the keyboard cable is connected properly to the keyboard port in the back of your computer. A keyboard with USB ports may be connected to any USB port. However, a PS/2 keyboard must be connected to the PS/2 keyboard port. A2 Press the key several times to check whether the Num Lock LED lights. If this does not function properly, it means that your computer is down. You must reboot your computer.
computer WF10-5 3/7/02 5:18 PM Page 12 SAMSUNG Computer WF10 Power save mode Q Can I connect an USB device while in the power save mode. A When you connect an USB device in the power save mode, you may not receive a normal display. An USB device must be connected while you are in standard operation mode. Q My USB device won’t operate properly after leaving the power save mode A Unplug and then plug in the USB device again.
computer WF10-5 3/7/02 5:18 PM Page 13 Others Q I don’t get clear sound when I play a MIDI file in my Karaoke program. A Run Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices then select the Audio tab. Select ‘Microsoft GS Wavetable SW Synth in MIDI music playback’ and click OK. Q My computer cannot recognize the CD drive. A1 Check to see if the CD drive and motherboard signal and/or power cables is connected properly.
computer WF10-5 3/7/02 5:18 PM Page 14 SAMSUNG Computer WF10 Q I cannot run games and I’m getting noise in the sound/music. A1 If you’ve reinstalled Windows, change the CD Drive driver setup to DMA. The following is the procedure to use when the CD driver is setup as the Master for the secondary IDE controller (default). 1. Click start > Control Panel > Performance and Maintenance > System. 2. Select the Hardware tab and click on Device Manager. 3.
computer WF10-5 3/7/02 5:18 PM Page 15 Q How do I setup the graphics output on digital when using a LCD monitor. A When you are using an LCD monitor connected to the DVI monitor port, setup the soundcard output on digital. By doing so, both your graphics card and monitor will offer digital output for better picture quality. Please setup as follows according to the type of graphics card used. ■ For models with the GeForce2MX graphics card 1. In the Desktop, click on the right mouse button.
computer WF10-5 3/7/02 5:18 PM Page 16 SAMSUNG Computer WF10 86 SAMSUNG Computer WF10
computer WF10-Apend 3/7/02 5:20 PM Page 1 Appendix Appendix The Appendix contains the System Spec, Other Useful Information, and Cautionary Measures.
computer WF10-Apend 3/7/02 5:20 PM Page 2 SAMSUNG Computer WF10 Specifications Let us look at the computer’s basic specification. The product specifications may vary according to the product model. Item Specifications Remarks CPU Cache Memory Main Memory System Chipset Intel Pentium 4 PGA-478 1.4GHz-2.
computer WF10-Apend 3/7/02 5:20 PM Page 3 Other Useful Informatin Copyrights Samsung Co., Ltd. owns the copyright to this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronically, mechanically, or through audio, without the consent of Samsung Co., Ltd.. The information in this document is subject to change without prior notice. The manufacturer of this product does not guarantee against data loss.
computer WF10-Apend 3/7/02 5:20 PM Page 4 SAMSUNG Computer WF10 Safety Instructions Instructions for Setup ● Set up the system on a stable work surface. If the system is dropped it may be damaged or it may inflict injuries on the user. ● Do not use loose power outlets or damaged power cables. There is a danger of electric shocks or fires. ● Set up the system in a clean, dry and airy place. If the system overheats, it may be damaged or it may cause fires. ● Use standard power voltage.
computer WF10-Apend 3/7/02 5:20 PM Page 5 Instructions for careful handling ● Handle with care so as not to damage the data in the hard disk. - Since the hard disk is fragile and sensitive to external conditions, it may be damaged from temperature changes or impact during operation. Take extra care to prevent such damages. - Loss of data due to external conditions or carelessness during use is the user’s sole responsibility and the manufacturer shall not be held liable for any compensation.
computer WF10-Apend 3/7/02 5:20 PM Page 6 SAMSUNG Computer WF10 92 SAMSUNG Computer WF10
