User manual

SAMSUNG Computer WF10

Setting up Password

If you assign a Password, the computer will verify that password upon turning on

your computer or executing BIOS setup.

The Password can protect data and/or files in your computer by restricting use

by other users.

■

Setting up Password

1. Execute BIOS Setup Utility by referring to instructions on entering setup in the

previous section.

2. Press on the key to move to the Security menu once Setup is executed.

3. Select Set Supervisor Password and press Enter.

4. Input your password in the Enter New Password box and press Enter.

You may use up to 8 characters or numbers for

your password.

You may not use any special characters.

5. Reenter your password in the Confirm New Password box and press Enter.

6. Press Enter in the Setup Notice window.

7. Press F10, and hit Enter.

You must now provide your Password whenever you turn your computer on or

enter BIOS Setup Utility.

If you fail to provide the correct Password, three consecutive times,

you must restart your computer and reenter the correct Password.

■

Canceling Password

1. Repeat step 1 to 3 in the above instructions on setting up your Password.

2. Input the Current Password and press Enter.

Leave both the Enter New Password box and Confirm New Password box

empty and press Enter.

Set Supervisor Password

Enter New Passord [ ]

Confirm New Passord [ ]

computer WF10-3 3/7/02 5:08 PM Page 10