User manual

SAMSUNG Computer WF10

Disassembling computer

You will need to open the computer cover to replace your parts or upgrade your

PC. The components and/or internal architecture may vary depending on option-

al specifications.

There is a danger for serious potential damage when your computer is

exposed to electric shock. Please unplug the power cord before your begin

disassembling. Additionally, parts may be damaged by small amounts of static

electricity flowing in your body. Please take special care when handling.

(Electric discharge on the metal parts)

Your computer consists of many sharp components. Please handle carefully.

If you don't feel confident about upgrading procedures, please contact the

customer service support center for assistance.

First, turn your computer off and unplug all the cables that are connected

to the power cord.

■

Disassembling the pedestal

1. Lay your computer on its back.

2. Pull the pedestal upward while pulling

the pedestal’s latch forward. Separate

the pedestal and your computer.

■

Opening the cover

1. Lay your computer on its right side.

2. After lift the Open Cover Latch(Lid

Latch Ring) and pull it about 1cm

towards your body with your right hand

while holding the computer down with

your left hand.

Pedestal Latch

Open Cover Latch

(Lid Latch Ring)

computer WF10-4 3/7/02 5:12 PM Page 2