User manual

4. Place your card in the slot and push until it is completely inserted.

The computer may not function properly, or the motherboard may be dam-

aged if the card is not inserted properly. Please take special care to insert

the card properly.

If it is difficult to insert the card because the connectors are too long

You can insert the card more easily if you rest the cover on the Cover

Stopper(Lid safety Latch).

5. Use the screws removed from the brackets to fix the card in place.

6. Read the user’s manual that came with the particular card to Connect the

Internal Cables.

7. Close the cover and Connect the External Cables such as power cord, etc.

8. Turn your computer On. Refer to the card’s user’s manual to install necessary

drivers and/or programs.

Tilt the cover to lay it on the Cover

Stopper(Lid Safety Latch).

Chapter 4. Upgrading your computer

computer WF10-4 3/7/02 5:12 PM Page 7