User manual

SAMSUNG Computer WF10

6. Replace with a new CPU.

You must line up the PIN on the socket with the PIN on the CPU when

inserting the CPU in place.

7. Lock the CPU socket lever in place and attach the Heat Sink and Cooling Fan.

8. Hook one of the Cooling Fan’s Clips then push on the handle to fix in place.

Fix the remaining clip in place using the same procedure.

9. Connect the Cooling Fan Power Cable. CPU replacement is complete.

Line up the section of the socket

without PIN holes with the section of

the CPU marked with a , to insert.

▼

computer WF10-4 3/7/02 5:12 PM Page 18