User manual

SAMSUNG Computer WF10

Q I cannot run games and I’m getting noise in the sound/music.

A1 If you’ve reinstalled Windows, change the CD Drive driver setup to DMA.

The following is the procedure to use when the CD driver is setup as the

Master for the secondary IDE controller (default).

1. Click start > Control Panel > Performance and Maintenance >

System.

2. Select the Hardware tab and click on Device Manager.

3. Double-click on IDE ATA/ATAPI controllers and again on Secondary

IDE Channel.

4. Change the Device 0 Transfer Mode in the Advanced Settings tab to

DMA if available.

A2 Try adjusting the Hardware Acceleration

1. Click start > Control Panel > Sounds, Speech, and Audio Devices>

Sounds and Audio Devices.

2. Click Advanced in the Speaker settings on the Volume tab.

3. After clicking on the Performance tab, adjust Hardware acceleration.

Q When installing the Windows XP sound driver for the first time.

A When you install the sound driver for the first time after installing Windows

XP, the gameport/MPU401 is automatically installed in the final step.

Therefore, when the message “New Hardware has been installed and is

ready for use” appears indicating that the gameport/MPU401 has been

installed, select “Yes, restart my computer now” in the Setup window and

press [Finished] to complete driver installation.

computer WF10-5 3/7/02 5:18 PM Page 14