Washer User manual WF45M5500A*/WF45M5100A* WF5500M_DC68-03773A-05_EN.
Contents Safety information 4 Contents What you need to know about the safety instructions Important safety symbols Important safety precautions California proposition 65 warning Critical installation warnings Installation cautions Critical usage warnings Usage cautions Critical cleaning warnings 4 4 5 6 6 8 8 10 13 Installation 14 Unpacking your washer What’s included Installation requirements Step-by-step installation 14 15 17 22 Before you start 28 Initial settings Laundry guidelines Detergent
43 Self Clean+ Smart Care Emergency drain Cleaning Recovery from freezing Care against an extended time of disuse Cleaning the exterior Cleaning the interior 43 44 45 46 49 49 50 50 Troubleshooting 51 Checkpoints Information codes 51 55 Specifications 57 Fabric care chart Protecting the environment Declaration of conformity Specification sheet Cycle chart 57 58 58 59 60 English 3 WF5500M_DC68-03773A-05_EN.
Safety information Congratulations on your new Samsung washer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your washer’s many benefits and features. What you need to know about the safety instructions Safety information Please read this manual thoroughly to ensure that you know how to safely and efficiently operate the extensive features and functions of your new appliance.
Important safety precautions WARNING 1. Read all instructions before using the appliance. 2. Do not wash or dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode. 3. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children. 4.
Safety information CALIFORNIA PROPOSITION 65 WARNING WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov. Safety information Critical installation warnings WARNING The installation of this appliance must be performed by a qualified technician or service company. • Failure to do so may result in electric shock, fire, an explosion, problems with the product, or injury. The appliance is heavy, therefore take care when lifting it.
If the appliance, power plug, or power cord is damaged, contact your nearest service center. This appliance must be properly grounded. Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line. This may result in electric shock, fire, an explosion, or problems with the product. Never plug the power cord into a socket that is not grounded correctly. Make sure that the socket is in accord with local and national regulations.
Safety information Installation cautions CAUTION This appliance should be positioned in such a way that the power plug is easily accessible. • Failure to do so may result in electric shock or fire due to electric leakage. Safety information Install your appliance on a solid, level floor that can support its weight. • Failure to do so may result in abnormal vibrations, movement, noise, or problems with the product.
Do not open the washer door by force while it is operating (high-temperature washing/ drying/spinning). • • Water flowing out of the washer may result in burns or cause the floor to be slippery. This may result in injury. Opening the door by force may result in damage to the product or injury. • Safety information Do not insert your hand under the washer while an operation is in progress. This may result in injury. Do not touch the power plug with wet hands. • This may result in electric shock.
Safety information If any foreign substance enters the appliance, unplug the power plug and contact your nearest Samsung Customer Service. • This may result in electric shock or fire. Do not let children (or pets) play in or on your washer. The washer door does not open easily from the inside and children may be seriously injured if trapped inside. Safety information Usage cautions CAUTION If the washer is contaminated by a foreign substance such as detergent, dirt, food waste, etc.
Open the faucet and check if the water supply hose connectors are firmly tightened and that there are no water leaks before using the product. • If the connectors on the water supply hoses are loose, it may result in a water leak. The product you have purchased is designed for domestic use only. Do not stand on the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
Safety information Do not touch the insides of the drum during or just after drying as it is hot. • This may result in burns. Do not insert your hand into the detergent drawer. • • Safety information This may result in injury as your hand may be caught by the detergent input device. Do not use the liquid detergent container (on applicable models only) for powdered detergent. Remove the container and put powdered detergent directly into the Main wash compartment.
Place socks and brassieres in a washing net and wash them with the other laundry. Do not wash large laundry items such as bedding in the washing net. • Failure to do so may result in injury due to abnormal vibrations. Do not use hardened detergent. If it accumulates inside the washer, it may result in a water leak. Make sure that the pockets of all the clothing items to be washed are empty.
Installation Follow these instructions carefully to ensure proper installation of your washer and to prevent accidents when doing laundry. WARNING Certain internal parts are intentionally not grounded and may present a risk electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve and pump. Unpacking your washer Installation Unpack your washer and inspect it for shipping damage.
What’s included Make sure all the parts are included in the product package. If you have a problem with the washer or the parts, contact a local Samsung customer center or the retailer. 01 08 09 10 03 04 11 05 06 12 07 01 Release lever 02 Detergent drawer 03 Door 04 Drum 05 Filter cover 06 Pump filter 07 Emergency drain tube 08 Worktop 09 Control panel 10 Power plug 11 Drain hose 12 Levelling feet English 15 WF5500M_DC68-03773A-05_EN.
Installation Parts supplied Bolt caps Hose guide Tie straps Parts not supplied Installation Water hoses (sold separately) Anti-slip pads (sold separately) Tools needed for installation Wrench Phillips screwdriver Level Adjustable Plier Measuring tape NOTE • • • Bolt caps: The number (3 to 6) of bolt caps provided depends on the model. The appearance of the washer and provided accessories may differ with the model.
Installation requirements Electrical supply and grounding Water supply • Proper water pressure for this washer is between 20-116 psi (137-800 kPa). • AC 120 V / 60 Hz / 15 AMP fuse or circuit breaker is required. Use an individual branch circuit. Connect only the washer to the circuit. To ensure proper grounding, the washer comes with a power cord featuring a three-prong grounding plug for use in a properly installed and grounded outlet. Do not modify the provided plug.
Installation Drain Alcove or closet installation Samsung recommends a standpipe 18 in (46 cm) high. The drain hose must be connected through the hose clip to the standpipe, and the standpipe must fully cover the drain hose. Minimum clearance for stable operation: Flooring Installation For best performance, the washer must be installed on a solid floor. Wood floors may need to be reinforced to minimize vibration and/or unbalanced loads.
Undercounter installation A B C D 39 in. (991 mm) C 27 in. (686 mm) B 1 in. (25 mm) D 1 in. (25 mm) Installation on a pedestal A E F B C D A 54.6 in. (1387 mm) D 27 in. (686 mm) B 34 in. (864 mm) E 38.7 in. (984 mm) C 5.9 in. (150 mm) F 53.4 in. (1356 mm) English 19 WF5500M_DC68-03773A-05_EN.
Installation Side by side installation A Installation A B C D B A E F A* 1 in. (25 mm) D 34 in. (864 mm) B 27 in. (686 mm) E 2 in. (51 mm) C 17 in. (432 mm) F 5.9 in. (150 mm) *This clearance is not applicable to stand-alone washers. 20 English WF5500M_DC68-03773A-05_EN.
Stacked installation (Model: SKK-7A) I E A B Installation F C D G H J K L A 3 in. (76 mm) G 1 in. (25 mm) B 48 in². (31000 mm²) H 27 in. (686 mm) C 24 in². (15500 mm²) I 5 in. (127 mm) D 3 in. (76 mm) J 3 in. (76 mm) E 6 in. (152 mm) K 34 in. (864 mm) F 78.5 in. (1994 mm) L 8 in. (203 mm) WARNING • • Samsung’s washers and dryers can be stacked to maximize usable space. The dryer legs need to be removed to stack the washer and dryer.
Installation Step-by-step installation STEP 1 Select a location Location requirements: • A solid, level surface without carpeting or flooring that may obstruct ventilation • No direct sunlight • Adequate room for ventilation and wiring • Ambient temperature always higher than the freezing point (32 ˚F / 0 ˚C) • Away from heat sources STEP 2 Remove the shipping bolts Installation Unpack the product package and remove all shipping bolts. 1.
STEP 3 Adjust the levelling feet 1. Gently slide the washer into position. Excessive force may damage the levelling feet. 2. Level the washer by manually adjusting the levelling feet. 3. When levelling is complete, tighten the nuts using the spanner. An adjustable wrench or 17 mm openend wrench is required to loosen or tighten the leveling feet.
Installation To connect the water hoses to the faucets: 1. Connect one end of each water hose to the Hot or Cold tap. 2. Turn the fittings by hand until they are tight, and then tighten them by just an additional two-thirds of a turn with a pliers. Do not overtighten the fittings. You can damage them. 3. When done, pull the water hoses up and down to check if they are properly connected. Installation 4. Put the other ends of the hoses into a bucket and open the taps for 10-15 seconds to remove impurities.
5. Connect the other ends of the water hoses to the corresponding inlets on the rear of the machine as specified. Make sure the hot water hose is connected to the hot inlet, and the cold water hose to the cold inlet. 6. Repeat step 2 above on the other fittings. Make sure both water hoses are connected properly. See the “4C” information code for troubleshooting. NOTE If you do not want to use the hot water hose, insert the inlet cap into the hot water inlet.
Installation STEP 5 Position the drain hose The drain hose can be positioned in three ways: Over the edge of a wash basin The drain hose must be placed at a height of between 24 in. (60 cm) and 35 in. (90 cm) from the floor. To keep the spout of the drain hose bent, use the supplied A plastic hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage. Installation ln a standpipe or laundry tub B C D * E The laundry tub (B) or standpipe (C) must be no shorter than 18 in.
Wall standpipe drain system A The drain hose must be placed into a wall standpipe drain system. To keep the end of the drain hose bent, use the supplied hose guide (A). Secure the guide to the wall using a hook to ensure stable drainage. Remove the small circle film (B) above the door latch before use. B STEP 7 Power on Plug the power cord into an AC 120 V / 60 Hz / 15 AMP approved electrical outlet protected by a fuse or circuit breaker. Then, press POWER to turn on the washer.
Before you start Initial settings Run Calibration (recommended) Calibration ensures accurate weight detection by the washer. Make sure the drum is empty before running Calibration. 1. Press POWER to turn on the washer. 2. Press and hold Temp. and Delay End simultaneously for 3 seconds. 3. Press START/PAUSE to start Calibration. - The door is locked during the operation. - The drum keeps rotating clockwise and anticlockwise for several minutes. 4. When complete, the washer turns off automatically.
STEP 4 Prewash (if necessary) Select the Prewash option for the selected cycle if the laundry is heavily soiled. Do not use the Prewash option if you will be adding detergent manually to the drum. STEP 5 Determine the load capacity Do not overload the washer. Overloading may cause the washer to wash improperly. NOTE For bedding or bedding covers, the recommended maximum spin level is “Low or Medium Spin”, and the load capacity is 3.0 kg or less.
Before you start Detergent drawer guidelines The washer provides a four-compartment dispenser: the front-left compartment for the main wash, the rear-left for pre-wash, the front-right for fabric softeners, and the rearright for the liquid chlorine bleach. A C B 1. Main-wash compartment (A): Add mainwash detergent, water softener, soaking detergent, color–safe, and/or stain removers. 2. Softener compartment (B): Add fabric softener. Do not exceed the max line. Before you start 3.
3. Add fabric softener to the softener compartment. Do not exceed the max line (A). CAUTION - - A Powdered fabric softener is not recommended. Use liquid fabric softener only. Concentrated fabric softener must be diluted with water before being added. Do not add main-wash detergent to the softener compartment. Before you start 4. Close the detergent drawer. English 31 WF5500M_DC68-03773A-05_EN.
Before you start To use powdered detergent First, remove the provided liquid detergent container from the mainwash compartment. Then, add powdered detergent to the main-wash compartment according to the detergent manufacturer’s instructions. CAUTION Do not add powdered detergent to the liquid detergent container. Before you start To use the bleach compartment Add only liquid chlorine bleach to the bleach compartment. Do not exceed the max line.
Operations WARNING To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Feature panel WF45M5500A* 08 02 07 01 06 03 04 05 06 Operations WF45M5100A* 08 02 07 01 06 03 04 05 06 English 33 WF5500M_DC68-03773A-05_EN.
Operations 01 Cycle Selector Turn the dial to select a cycle. 02 Display The display shows current cycle information and estimated time remaining, or an information code if the washer needs to be checked. Press to change the water temperature for the current cycle. 03 Temp. WF45M5500A* • Extra Hot: Heavily soiled, colorfast items. Only available with NORMAL, HEAVY DUTY, and SANITIZE. • Hot: Whites and heavily soiled, colorfast items. • Warm: Uses warm water only in the final rinse process.
Press to change the spinning speed for the current cycle. • High: Underwear, t-shirts, jeans and sturdy cottons. • Medium: Jeans, wrinkle-free or wash-and-wear items and synthetics. • Low: Delicate items that requires a lower spinning speed. • No Spin: The drum does not spin after the final drain process. 04 Spin • Rinse Hold (No lamp turns on): The final rinse process is suspended so that the laundry remains in the water. To unload the laundry, run a drain or spin process.
Operations Simple steps to start WF45M5500A* 2 1 5 4 3 WF45M5100A* 2 Operations 1 5 4 3 1. Press POWER to turn on the washer. 2. Turn the Cycle Selector to select a cycle. 3. Change the cycle settings (Temp., Spin, and Soil Level) as necessary. 4. Select desired options as necessary. 5. Press START/PAUSE. To change the cycle during operation 1. Press START/PAUSE to stop operation. 2. Select a different cycle. 3. Press START/PAUSE again to start the new cycle.
Cycle overview Standard cycles Cycle QUICK WASH Description • For lightly soiled items that you want to finish washing quickly. • For sheer fabrics, bras, lingerie (silk), and other handwashonly fabrics. For best performance, use liquid detergent. DELICATES • PERM PRESS RINSE+SPIN For wash-and-wear, synthetic fabrics, and lightly to normally soiled items. • Features an additional rinse process after fabric softener is applied to the laundry.
Operations Steam cycles Cycle DEEP STEAM (WF45M5500A* model only) Description • For heavily soiled, colorfast items. This cycle uses steam and a high water temperature to effectively remove stains. • For cottons, bed linens, table linens, underwear, towels, or shirts. The washing time and the number of rinses are automatically adjusted according to the load. • For sturdy, colorfast fabrics and heavily soiled items. • • • For bulky items such as comforters, blankets, and sheets.
Options Option Description Adds an additional rinse at the end of the cycle to remove laundry additives more thoroughly. Extra Spin • Adds additional spin time to remove more water from loads. Spin Only • Press to run the Spin cycle of a selected course only. • Press this button to use the Steam function. Steam is available with the NORMAL, HEAVY DUTY, BEDDING, SANITIZE, DEEP STEAM and ALLERGEN. For heavily soiled, colorfast items, the Steam function improves stain treatment and uses less water.
Operations Delay End You can set the washer to finish your wash automatically at a later time by choosing a delay of between 1 to 24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish. 1. Select a cycle. Then, change the cycle settings if necessary. 2. Press Delay End repeatedly until a desired end time is set. 3. Press START/PAUSE. The indicator turns on with the clock running. 4. To cancel Delay End, restart the washer by pressing POWER.
Child Lock To prevent accidents by children or infants, Child Lock locks all buttons except for the Power button. To activate Child Lock • Press and hold both Soil Level and Spin for 3 seconds. Then, press START/PAUSE to activate. The door locks and the Child Lock indicator turns on. To deactivate Child Lock temporarily • You can deactivate Child Lock temporarily for 1 minute. To do this, press and hold both Soil Level and Spin for 3 seconds.
Operations ATC (Auto Temperature Control) ATC enables the washer to control water temperatures in each washing cycle using the internal thermistor. It is designed to maintain certain washing temperatures for best results. NOTE • • • If you select NORMAL or HEAVY DUTY, you may notice the washer supplying cold water. This is normal because the machine is designed to reduce power consumption.
Maintenance Keep the washer clean to prevent its performance from deteriorating and to preserve it throughout its life cycle. WARNING Certain internal parts are intentionally not grounded and may present a risk electric shock only during servicing. Service personnel – Do not contact the following parts while the appliance is energized: Control board, heat sink, motor, inlet valve and pump. Self Clean+ Certain usage and environmental conditions may result in some residue build-up or odor in the washer drum.
Maintenance Smart Care The Smart Care function helps you diagnose and troubleshoot your washer if it has a problem. To enable this function, you must first download the Samsung Smart Washer app from the Play Store or the Apple Store, and install it on a mobile device that has a camera. The Smart Washer Smart Care function has been optimized for: Galaxy and iPhone series devices. (It is not supported by some models.) As the washer operates, it runs it’s self-diagnosis function in the background.
Emergency drain In case of a power failure, drain the water inside the drum before taking out the laundry. 1. Power off the washer, and then unplug it from the electrical outlet. 2. Gently press the top area of the filter cover to open. 3. Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while holding the tube cap (A). A 5. When done, close the tube cap, and reinsert the tube. Then, close the filter cover.
Maintenance Cleaning Surface of the washer Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washer. Mesh filter Clean the mesh filter of the water hose once or twice a year. 1. Turn off the washer, and then unplug the power cord. 2. Close the faucet. 3. Loosen and disconnect the water hose from the back of the washer. Cover the hose with a cloth to prevent water from gushing out. 4. Use pliers to pull out the mesh filter from the inlet valve. Maintenance 5.
Pump filter It is advisable to clean the pump filter 5 or 6 times a year to prevent its clogging. A clogged pump filter may reduce the bubble effect. 1. Turn off the washer, and unplug the power cord. A 2. Drain the remaining water inside the drum. See the “Emergency drain” section on page 45. 3. Gently press the top area of the filter cover to open. 4. Turn the pump filter knob (A) to the left, and drain off the remaining water. 5. Clean the pump filter using a soft brush.
Maintenance CAUTION • • Make sure the filter knob is closed properly after cleaning the filter. Otherwise, this may cause a leak. Make sure the filter is inserted properly after cleaning it. Otherwise, this may cause an operational failure or a leak. Detergent drawer 1. While holding down the release lever (A) inside the drawer, slide open the drawer, and then remove the drawer from the washer. A 2. Remove the liquid detergent container from the drawer. 3.
Door diaphragm 1. Open the door, and then empty the drum. 2. Combine 3/4 cups of liquid chlorine bleach and 1 gallon of warm tap water. 3. Turn over the diaphragm (A). A 4. Wearing rubber gloves, use a soft, clean cloth dipped in the water and bleach solution to clean the diaphragm. 5. Let stand 5 minutes, and then wipe up and dry well. 6. Put the diaphragm back into position. CAUTION Use bleach carefully and be sure to follow the bleach manufacturer’s use and care instructions.
Maintenance Cleaning the exterior 1. Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to your washer and prevent the unlikely possibility of damage from escaping water. Leave the door open to allow the inside of your washer to dry out. 2. Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur. Clean the following as recommended below: - Control Panel – Clean with a soft, damp cloth. Do not use abrasive powders or cleaning pads.
Troubleshooting Checkpoints If you encounter a problem with the washer, first check the table below and try the suggestions. Problem Does not start. Water supply is insufficient, or no water is supplied. • • • • • • • Make sure the washer is plugged in. Make sure the door is properly closed. Make sure the faucets are open. Make sure to press or tap START/PAUSE to start the washer. Make sure Child Lock is not activated.
Troubleshooting Problem Action • • • Does not drain and/ or spin. • • • • • • The door does not open. • • Troubleshooting • • Excessive suds. • • • Cannot add additional • detergent. Make sure the drain hose is neither kinked nor obstructed all the way to the drain system. If there is a drain restriction, call for service. Make sure the debris filter is not clogged. Close the door and press or tap START/PAUSE. For your safety, the washer will not tumble or spin unless the door is closed.
Problem Action • • • • The washer stops. • • • • • • • • • • The load is wet at the end of a cycle. • • • • Fully open both taps. Make sure the temperature selection is correct. Make sure the hoses are connected to the correct taps. Flush water lines. Make sure your water heater is set to supply hot water with a minimum temperature of 120 °F (49 °C) at the tap. Also, check the water heater capacity and recovery rate. Disconnect the hoses and clean the mesh filters. The mesh filters may be clogged.
Troubleshooting Problem Action • • Make sure the door is properly closed. Make sure all hose connections are tight. Make sure the end of the drain hose is correctly inserted and secured to the drain system. Avoid overloading. Use high efficiency (HE) detergent to prevent oversudsing. Has odors. • • • • Excessive suds collect in recesses and can cause foul odors. Run cleansing cycles to sanitize periodically. Clean the door seal (diaphragm). Dry the washer interior after a cycle has finished.
Information codes If the washer fails to operate, you may see an information code on the screen. Check the table below and try the suggestions. Code Action 1C Check the water level sensor. • Power the washer off. Wait 2-3 minutes, power the washer on, and then try again. • Depending on the model, the drain system drains water automatically. The POWER and START/PAUSE buttons may be disabled during this process. DC DC1 The door is open. • Close the door and press START/PAUSE to resume operation.
Troubleshooting Code Action 5C Check the drain system. • Make sure the drain filter is not clogged. • If the drain filter is clogged, clean the filter, and then restart the washer. HC Check the washing heater. • Power off the washer, and then contact a Samsung service center. UB Check the spinning process. • The load may not be balanced inside the drum. Check the drum and make sure the load is balanced.
Specifications Fabric care chart The following symbols provide garment care direction. The clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to optimize garment life and reduce laundering problems.
Specification Iron dry or steam temperatures No steam (added to iron) High Do not iron Medium Low Dry-clean Dry-clean Warning symbols for laundering Do not dry-clean Do not wash Line dry / Hang to dry Do not wring Drip dry Do not bleach Dry flat Do not tumble dry Protecting the environment • This appliance is manufactured from recyclable materials. If you decide to dispose of it, please observe local waste disposal regulations.
Specification sheet C D A B Front loading washer Type Dimensions (inches (mm)) WF45M5500A* WF45M5100A* A. Height-overall 38.7 (984) B. Width 27 (686) C. Depth with door open 54.6 (1387) D.
Specification Cycle chart Use this chart to set the best cycle and options for you laundry. NOTE Setting : factory setting : can be selected Temp.
Use this chart to set the best cycle and options for you laundry. NOTE Setting : factory setting : can be selected Temp. H: Hot W: Warm C: Cool CD: Cold - Spin H: High M: Medium L: Low NS: No Spin RH: Rinse Hold Soil Level H: Heavy N: Normal L: Light WF45M5100A* Functions Spin Temp.
Warranty (U.S.A) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL PURCHASER WITH PROOF OF PURCHASE This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
This limited warranty covers manufacturing defects in materials or workmanship encountered in normal household, noncommercial use of this product and shall not cover the following: damage that occurs in shipment, delivery, installation, and uses for which this product was not intended; damage caused by unauthorized modification or alteration of the product; product where the original factory serial numbers have been removed, defaced, changed in any way, or cannot be readily determined; cosmetic damage inclu
Warranty (U.S.A) LIMITATION OF REMEDIES YOUR SOLE AND EXCLUSIVE REMEDY IS PRODUCT REPAIR, PRODUCT REPLACEMENT, OR REFUND OF THE PURCHASE PRICE AT SAMSUNG’S OPTION, AS PROVIDED IN THIS LIMITED WARRANTY.
Warranty (CANADA) SAMSUNG WASHER LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA, INC.
Warranty (CANADA) SAMSUNG will repair, replace, or refund this product at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
NO WARRANTY OR GUARANTEE GIVEN BY ANY PERSON, FIRM, OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Scan this with your smartphone QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca/support (English) www.samsung.com/ca_fr/support (French) DC68-03773A-05 WF5500M_DC68-03773A-05_EN.
