User Manual

Operations
English42
Operations
To deactivate Child Lock temporarily
• You can deactivate Child Lock temporarily for 1 minute. To do this, press and hold both
Temp. and Rinse for 3 seconds. The door is unlocked for 1 minute and the Child Lock
indicator blinks.
NOTE
• If you open the door 1 minute after deactivating Child Lock, an alarm sounds for up to
2 minutes.
• If you close the door within 2 minutes, the door locks and Child Lock is reactivated. If
you do not close the door or the door is not properly closed, the alarm keeps sounding
for 2 minutes.
• To add laundry after activating Child Lock, deactivate Child Lock or restart the washer.
To cancel Child Lock
• Press and hold both Temp. and Rinse for 6 seconds. The door unlocks, and the Child
Lock indicator turns off.
Alarm Off
You can turn the alarm sound on or off. When the alarm is off, the cycle completion
melody and the power-off beep will not sound. However, the other sounds stay active.
• Press Alarm Off to turn the alarm on or off.
• Your setting will be kept even after you turn off and then restart the appliance.
DOWNLOADED cycle
You can choose from more cycles available on the SmartThings app on your smartphone.
1. On your smartphone, select the DOWNLOADED cycle.
- You can choose from TOWELS, ALLERGEN, WOOL, ECO COLD, DEEP STEAM,
UNDERGARMENTS, BLOUSES, THIN BEDDING, TOWELS SANITIZE, DARKS, and POWER
RINSE.
2. Press Power on your washer.
3. Turn the Cycle Selector to DOWNLOADED.
4. Press and hold Start/Pause (Hold to Start).
Bixby
Bixby is a Samsung’s intelligence platform, and you can control the product with your
voice. To use the voice command feature, you must connect the product with the
SmartThings app on your phone. For products that do not recognize voice directly from
the product, you can use the Bixby on your smartphone to control some of the functions
of your product after connecting to the app.
Untitled-5 42 2019-07-26 PM 12:35:26