User Manual

When you grab
the
TV
to
install, remove, adjust the horizontal level,
or
tilt
the
wall
mount, do
not
apply direct force
on
the
display.
When you handle
the
TV
to
install, remove, adjust
the
horizontal level,
or
tilt
the
wall
mount,
be
careful
not
to
damage any cables.
Be
sure
that
the
TV
and
wall
mount
stand are
not
hit
with
excessive force
after
installing
the
wall
mount.
The
wall
mount
or
TV
may
be
damaged or
the
TV
connection
with
the
wall
mount
device may become unstable.
In
this
case,
reinstall
the
wall
mount
or consult
an
expert
for
assistance.
Check
the
product
model
as
well
as
the
enclosed user manual
for
each product and check
that
the
wall
allows
mounting.
-
Be
sure
the
wall
is
stable. If
the
wall
is
weak, reinforce
it
before installation.
- If
the
wall
is
not
cement, check
with
a specialist
to
determine
whether
the
TV
may
be
installed
on
it.
- Consult
an
expert
installer
if
you do
not
have any background knowledge about
the
wall
you
want
to
install
the
product on.
To
maintain product performance and prevent malfunctions, do
not
install
in
the
following
locations.
- Places where
there
is
a risk
of
vibration or shock:
The
product may
fall
and
be
damaged.
- Next
to
a
sprinkler
sensor: The sensor may detect
the
heat
from
the
TV
and sprinklers may start.
- Near high-pressure cables: The
TV
may
get
interfered by high-pressure cable and
the
screen may
not
display
correctly.
- Near heaters:
The
TV
may become overheated and malfunction.
-
Do
not
install
anywhere
other
than a vertical wall.
- Install
it
out
of
the
reach
of
children.
-
Do
not
penetrate
the
wall
to
install
inside.
Be
sure
to
check
the
type and condition
of
the
wall
you
will
install
on.
A
- Materials
to
be
used may
differ
depending
on
wall
type.
Choose materials based
on
the
specifications below.
-
You
do
not
need
to
use
all
the
supplied screws. However,
you
must
use
at
least 4 screws.
You
must
use screws in
the
two
locations marked
as
A.
- Choose
at
least 2
of
the
parts marked B
to
assemble
depending
on
surroundings.
-English
7-
-7-