Installation Guide

- English 2 - - English 3 -
Cautions when installing
Model name No gap wall mount
Width (mm) 520
Height (mm) 277
Thickness (mm) 15.6
TV tilt (°) * Max. 5° (other tilt angles are not allowed)
Package size (W x D x H) (mm) 594 x 378 x 75
Package weight (kg) 4.0±0.5
Max. allowable TV weight (kg) 50
Standard stud distance 16" supported / 24" not supported
Clearance from the wall (mm)
The minimum clearance from the wall differs depending on the model.
Check the installation manual.
The actual clearance from the wall may be greater than the minimum
clearance depending on the installation environment.
* You cannot install the TV at a random angle. The tilt angle can be expanded up to 5 degrees.
• Be sure to use the components and parts provided for installing the wall mount.
• The manual instructions and provided parts are based on the typical walls (made of wood or concrete). (In case of
some models, the drywall mounting parts are additionally provided.)
• In case of the other cases, use separate mounting parts or perform wall reinforcement in advance. If required,
install the wall mount with an aid of expert.
• Be cautious not to damage the TV screen while installing the wall mount.
• Check your TV's model series. Then use the appropriate preparation methods for the support frames using the
appropriate screws.
• If you do not follow the installation instructions suitable for your TV model, the wall mount and TV connection
may be unstable.