WASHING MACHINE Owner’s Instructions WT80S0(P)/WT80S1(P)/WT80S2(P)/WT80S2SG BEFORE USING THE WASHING MACHINE 1 PRECAUTIONS 1 CONTROL PANEL 1 DESCRIPTION AND CLEANING OF PART 2 WASHING PROCEDURE 3 To Wash 3 To Spin Dry 3 To Rinsing 3 Overflow rinse 3 Additional rinse 4 INSTALLATION 4 Location 4 Mounting the legs 4 Connecting the drain hose 4 LAUNDRY GUIDE 5 MAINTENANCE 5 TROUBLE SHOOTING 5 Before operating the washing machine, please read this manual thoroughly, and retain it for future reference.
IF YOU NEED HELP. Do not hesitate to call your local Samsung Service Center. They will be pleased to help you. Be sure to give them your name, address, telephone number and the purpose of the call. SPECIFICATIONS DIMENSIONS (WxDxH) 792 x 465 x 951 mm WATER PRESSURE 0.05~0.78 MPa(0.5 ~ 8.0kg .
BEFORE USING THE WASHING MACHINE • Remove the cap-hose from the drain hose. • In the case of pump drained washer, remove the cap-hose from the drain hole. PRECAUTIONS WHEN OPERATING • Don't use excessively hot water. (50˚C or more) Plastic parts may be deformed or damaged. Also, clothing may be deformed or decolored. • Before washing,check all pockets. If nails or pins remain in pockets,they may damage the washer or clothes. CONTROL PANEL CAUTIONS • Be sure that the washer is grounded.
DESCRIPTION AND /CLEANING OF PARTS SPIN DRYER LID When you open this lid while the spin basket is spinning,the spinning will be stopped by the brake system. SPIN DRYER BASKET INNER LID DRAIN HOSE (with pump) • Push the strainer(filter) out and take up the filter as shown in figure. Wash the filter and washing tub. POWER CORD The plug’s shape may not be similar to that shown in this drawing. OVERFLOW FILTER LINT FILTER This is used for gathering the dregs made during washing.
WASHING PROCEDURE TO WASH TO SPIN DRY TO RINSING 1. Before starting to wash, proceed as follows, Connect the water supply hose and open the water tap. • Lay the drain hose down toward a sinkhole. (In case no drain pump) • Place the drain hose in sink or bath. (In case no drain pump) • Connect the power cord to the power supply outlet. 1. Transfer the clothes into the spin basket and arrange the clothes evenly. 1. Set the cycle selector KNOB to ‘WASH.RINSE’.
INSTALLATION LOCATION Leave some space of at least 15cm between the washing machine and the wall. Place the washing machine on a sturdy flat surface. If the washing machine is placed on an uneven or weak surface, noise or vibration may occur. (Allowable is 2˚) Never install the washing machine near water. Do not place the washing machine in steamy room or where the washing machine is directly exposed to rain. Moisture may damage electrical insulation and cause an electrical shock to occur.
LAUNDRY GUIDE MAINTENANCE WASHING TIME TYPE OF CLOTHING WASHING TIME WASHING SELECTION Extremely soiled heavy fabric 10 to15 minutes Linen, cotton, etc. 8 to10 minutes Ordinary clothes (underwear,etc) 7 minutes Slightly soiled synthetic fiber 2 to 5 minutes TROUBLE SHOOTING TO LOAD THE LAUNDRY INTO THE SPIN BASKET. Press the laundry evenly and put the safety cover into the spin basket as shown in the figure. NORMAL SPIN DRY TIME TIME TYPE OF FABRIC 1 min. 1~2 min. 3~5 min. 5 min.