User Manual
Table Of Contents
- overview
- outdoor vandal dome camera
- indoor dome camera
- flush mount dome camera
- outdoor bullet camera
- box camera
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
English _39
●● BOX CAMERA
MOUNTING THE LENS
Disconnect the power before proceeding.
M
`
The CS mount Lens are not included in the product package.
It is recommended that megapixel lens are use on this camera to optimise performance.
Mounting the CS mount Lens on a camera
Turn the CS mount Lens clockwise to attach it.
CS mount Lens
Connecting the Auto Iris Lens connector
Plug the Auto Iris Lens connector of the lens in the camera connecting groove.
Focusing
Select a target to film, turn the zoom lever of the lens to adjust the magnification and then focus the lens so that
target is clearly displayed.
M
`
After focusing with the zoom lever of the lens, press the [FOCUS] button on the rear of the camera to adjust the lens even
more clearly.
`
The i-CS lens is equipped with a motor so it can be adjusted with the web viewer for zoom / focus adjustment and iris open /
close.