User Manual
Table Of Contents
- overview
- outdoor vandal dome camera
- indoor dome camera
- flush mount dome camera
- outdoor bullet camera
- box camera
- installation & connection
- network connection and setup
- Connecting the Camera Directly to Local Area Networking
- Connecting the Camera Directly to a DHCP Based DSL/Cable Modem
- Using Device Manager
- Automatically searching camera
- Configuring IP address
- Manually registering camera
- Automatically configuring IP
- Port Range Forward (Port Mapping) Setup
- Connecting to the Camera from a Shared Local PC
- Connecting to the Camera from a Remote PC via the Internet
- web viewer
- appendix
installation & connection
42_ installation & connection
CONNECTING WITH OTHER DEVICE
<XNV-9082R/XNV-8082R/XND-9082RV/XND-8082RV/XND-9082RF/XND-8082RF>
SOFT
AP
Ethernet
Monitor for installation
Power
WiFi dongle
<XNO-9082R/XNO-8082R>
SOFT
AP
Monitor for installation
Ethernet
Power
WiFi dongle
<XNB-9002/XNB-8002>
RESET
VIDEO
USB
AUDIO
OUT
AUDIO
IN
FOCUS
NETWORK
PoE
AC 24V
DC 12V
1 : ALARM 1
2 : ALARM 2
3 : GND
4 : NC
5 : RS-485+
6 : RS-485-
2
1
3
4
5
6
SOFT
AP
Monitor for installation
Ethernet
Grounding cable
Power
WiFi dongle
J
`
The Test Monitor Out port of the product is provided for easier installation, and is not recommended for monitoring purposes.
`
The Micro USB port of the product is provided for easier installation, and is not recommended for monitoring purposes.