User Manual

English _43
●● INSTALLATION & CONNECTION
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Connecting WiFi
Camera Setup
1. Connect OTG adapter (5-pin) and WiFi dongle to the micro USB port.
Smartphone Setup
1. Install the Wisenet Installation application.
2. Select the camera SSID after turning on the WiFi.
3. Run the Wisenet Installation application.
4. When you log in to the camera, the video will be connected.
`
The video will be played without being logged in during the initial connection.
5. You can adjust angle of view while watching the video through smartphone.
Recommended dongle manufacturer
Manufacturer Model
NETIS WF2123 n300
EDIMAX EW-7811Un
IP Time N100mini
TP-LINK TL-WN823N V1
ASUS USB-N13
ASUS USB-N10 NANO
NETGEAR WNA3100M
IODATA WN-G150UMW
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the
camera.
J
`
If the power sources for PoE and DC 12 V are simultaneously turned on, the device power will be supplied by both of PoE and
DC 12 V. (XND-9082RV/XND-8082RV/XND-9082RF/XND-8082RF/XNV-9082R/XNV-8082R)
`
When supplying PoE and DC 12V or PoE and AC 24V power at the same time, the equipment is powered by the external
source (AC 24V, DC 12V). (XNO-9082R/XNO-8082R/XNB-9002/XNB-8002)
`
The AC power is available after purchasing an AC module (SPC-100AC). (XNV-9082R/XNV-8082R)
- If the power sources for PoE and AC 24 V are simultaneously turned on, the external power source (AC 24 V) will be
used.
`
You can also use a router featuring PoE to supply power to the camera.
`
Use PoE that is compliant with the IEEE 802.3af protocols.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
Connect the set and the adapter power line first, and then connect the power cable to the outlet on the wall.
Power Cable Specification for Each Model
Model Input power Wire Type (AWG) Cable Length (Max.)
XND-9082RV/XND-8082RV
XND-9082RF/XND-8082RF
DC 12V
#20 13m
#18 21m
XNV-9082R/XNV-8082R
AC 24V
#22 16m
#20 26m
DC 12V
#20 13m
#18 21m
XNO-9082R/XNO-8082R
AC 24V
#22 14m
#20 23m
DC 12V
#20 11m
#18 18m
XNB-9002/XNB-8002
AC 24V
#22 16m
#20 26m
DC 12V
#20 13m
#18 21m
J
`
Be careful not to reverse the polarity when you connect the power cable.
`
AC 24 V can be connected as non-polar.
Network Cable Specification
Item Contents Remark
Connector RJ-45(10/100/1000BASE-T)
Ethernet 10/100/1000BASE-T
Cable Category 6
Max Distance 100M
PoE Support IEEE 802.3af