User Manual

12_ installation & connection
installation & connection
INSTALLATION (XND-6010/6020R/8020R/8030R/8040R)
Precautions before installation
Ensure you read out the following instructions before installing the camera:
• It must be installed on the area (ceiling or wall) that can withstand 5 times the weight of the camera
including the installation bracket.
• Stuck-in or peeled-off cables can cause damage to the product or a fire.
• For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
• If you use excessive force when installing the product, the camera may be damaged and malfunction.
If you forcibly install the product using non-compliant tools, the product may be damaged.
Disassembling
1. Using the L wrench provided, turn the 2 fastening bolts on
the dome cover counter clockwise to remove the cover.
2. Lift up the inner cover to separate it.
Installation
1. Attach the installation template to the selected area and punch 2
holes as shown in the figure.
2. Using 2 tapping screws provided, fix the camera at 2 holes drilled
with a template.
`
Set the < > mark imprinted on the camera to face the direction of camera
monitoring.
3. Connect the camera internal terminal with the corresponding
cable.
4. Adjust the lens in a desired direction by referring to the “Adjusting
the monitoring direction for the camera” section. (page 15)
J
`
We recommend you not to touch the lens as the camera lens has been
properly focused in the final process of manufacturing. If so, the lens may be out of focus or stained by alien substances.
5. Please connect the inner cover to the main body.
6. Grab the bottom part of the camera with one hand and the cover with
the other hand, align the arrows and assemble them using the hex key.
J
`
When connecting the dome cover, align the arrows and connect it perpendicularly
to the main body.
`
Make sure that the dome cover is correctly connected to the bottom part as shown
in the figure.
If the screw is not locked correctly, there can be a risk of injury due to the dome
cover falling.
1
2
FRONT
USB
VIDEO
DC 12V
RESET
1 2 3 4 5 6 7
1
2
FRONT
USB
VIDEO
DC 12V
RESET
1 2 3 4 5 6 7
1
2
FRONT
USB
VIDEO
DC 12V
RESET
1 2 3 4 5 6 7
1
2
FRONT
USB
VIDEO
DC 12V
RESET
1 2 3 4 5 6 7
Dome cover
Bolts
1
2
FRONT
USB
VIDEO
DC 12V
RESET
1 2 3 4 5 6 7