User Manual

English _15

●● INSTALLATION & CONNECTION

Optional Accessories for Installation

For your easier installation, you can purchase appropriate optional accessories available.

1. WALL MOUNT ADAPTOR(SBP-300WM or SBP-300WM1)/

HANGING MOUNT(XND-6010/6020R/8020R/8030R/8040R :

SBP-300HM7, XNV-6010/6020R/8020R/8030R/8040R : SBP-

122HM)

This adaptor is used when installing the dome camera onto a

wall.

2. CEILING MOUNT ADAPTOR(SBP-300CM)/HANGING MOUNT(XND-

6010/6020R/8020R/8030R/8040R : SBP-300HM7, XNV-6010/6020R/

8020R/8030R/8040R : SBP-122HM)

This adaptor is used when installing the dome camera on a concrete

ceiling.

3. POLE MOUNT ADAPTOR(SBP-300PM)

This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-

300WM1) installation on a pole whose diameter is bigger than 80mm.

4. CORNER MOUNT ADAPTOR (SBP-300KM)

This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or

SBP-300WM1) installation on the corner of wall joint.

Adjusting the monitoring direction for the camera

Adjusting the monitoring direction

You can adjust the camera direction only when the camera is fixed on the ceiling.

Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the

lens on its axis is called Rotation.

- The effective range of pan is a total of 354 degrees.

- The effective range of rotation is a total of 355 degrees.

- The effective range of tilt is a total of 67 degrees.

The image can be covered up by the camera case depending on the angle.

Do not forcefully turn the focus/zoom lens after the dome case is disassembled.

Otherwise, it may cause an incorrect focus due to a motor failure.

Methods of adjustment

1. After installing the camera, adjust the panning angle in consideration of the monitoring direction.

2. Set the horizontal angle so that the image is not reversed.

3. Adjust the tilt angle so that the camera faces toward the monitoring object.

FRONT

USB

VIDEO

DC 12V

RESET

1 2 3 4 5 6 7

Pan

Tilt

Lens rotation