User Manual

English _35
●● INSTALLATION & CONNECTION
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the
camera.
J
`
If the power sources for PoE and DC 12 V are simultaneously turned on, the device power will be supplied by both of PoE and
DC 12 V.
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE 802.3af protocols.
`
Be careful not to reverse the polarity when you connect the power cable.
`
The AC power is available after purchasing an AC module (SPC-100AC).
- Models: XNV-6081/XNV-6081R/XNV-8081R
- If the power sources for PoE and AC 24 V are simultaneously turned on, the external power source (AC 24 V) will be
used.
- AC 24 V can be connected as non-polar.
`
If you want to connect an external device, you must turn off the external device before proceeding.
`
Connect the set and the adapter power line first, and then connect the power cable to the outlet on the wall.
Power Cable Specification for Each Model
Model Input power Wire Type (AWG) Cable Length (Max.)
XND-6081V/F
XND-6081RV/RF
DC 12V
#18 22m
#20 14m
XND-8081RV/RF DC 12V
#18 20m
#20 13m
XNV-6081/6081R
DC 12V
#18 22m
#20 14m
AC 24V
#18 40m
#20 26m
XNV-8081R
DC 12V
#18 20m
#20 13m
AC 24V
#18 38m
#20 24m
Network Cable Specification
Item Contents Remark
Connector RJ45 (10/100BASE-T)
Ethernet 10/100BASE-T
Cable UTP Category 5e
Max Distance 100M
PoE Support IEEE 802.3af
Connecting to Audio Input/Output
Network
PC
Microphone
Speaker
Microphone
Microphone
Amp
Speaker
AmpSpeaker
1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the
microphone is connected to.
M
`
You can use the internal microphone of the camera without an external microphone connection
(only applicable for XND-6081V/XND-6081RV/XND-8081RV).
2. Connect the AUDIO OUT port of the camera with the speaker or LINE IN port of the amplifier that the
speaker is connected to.
3. Check the specifications for audio input.