User Manual

English _25
●● WEB VIEWER
To capture the snapshot
1. Click [Capture ( )] on the scene to capture.
2. When a captured video is saved, a notification message appears.
The captured image is saved in the designated folder for each browser.
M
`
If the screen is not captured by IE browser in Windows 7 or higher, run the IE Browser with the Admin privilege.
To save
1. Click the [Record ( )] icon.
2. To end the recording, press [Record (
)] again.
M
`
You can save the recorded file on the PC in an avi file format. Designate a path and save the video.
`
If you record in fish eye view mode, it will be saved as the original image instead of the distorted and compensated view that
the user is watching.
To fit the full screen
1. Click the [Full Screen ( )] icon.
2. This will fit the Viewer to the full screen.
3. To leave full screen mode, click the [Full Screen (
)] button again or press the [Esc] key on the
keyboard.
To Use Audio
1. Click [Audio ( )] icon to activate audio communication.
2. Use [
] bar to control the volume.
M
`
If there is no sound from pulling in and out the audio jack while it is in operation, click the [Audio ( )] icon to enable it
again.
`
To use audio, you need to set <Audio in> in “Video Profile” to <Enable> (page 29).
To Use Microphone
Click [Mic ( )] icon to activate the microphone.
M
`
If you are using IE or the Safari browser, you will need to install plug-in.
Item Description
h
PTZ
Controls the PAN/TILT/ZOOM motion.
Zoom In (
)
Drag the bar on the right side of the UI up, or click the [
] button
to zoom in the screen.
The farther the bar position is from the center, the faster the screen
will be zoomed in.
Zoom Out (
)
Drag the bar on the right side of the UI down or click the [
]
button to zoom out the screen.
The farther the bar position is from the center, the faster the screen
will be zoomed out.
Move screen (
) Moves in the direction where the cursor is located.
i
Fish eye view mode
You can select various view modes depending on the needs related to the camera’s location.
`
If <Camera Mounting Mode> is changed in the <Video setup> of <Video & Audio>, then
the installation direction of fish eye view is also changed in the [Live] tab.
j
Profile access information You can read the profile information.
k
Switch View Mode
Full Screen (
)
Double click on the video screen, and the current video will be
played in the full screen of the monitor.
Fit to screen (
)
A view mode in which the size of the camera video automatically fits
to the web browser size.
Size of the original file
(
)
View mode in which the video is played in the actual resolution.
Maintain Aspect Ratio
(
)
View mode that adjusts the aspect ratio to best fit the resolution.
l
Capture Save the current image as an image file.
m
Record The user can save the video on the PC.
n
Pixel Counter Checks the number of pixels in the selected area on the video screen.
o
Microphone control Activates the microphone.
p
Alarm output Activate the Alarm Out port.
q
Audio control Activates audio and adjusts the volume.
J
`
Some functions may not work on a specific browser or codec.